GOST 8.001-80

ГОСТ 8.001-80

State system of ensuring the unity of measurements. Rules for conducting the state tests of measuring means

Государственная система обеспечения единства измерений. Организация и порядок проведения государственных испытаний средств измерений

Status: Not effective - Canceled in the Russian Federation. IUS 12-2001

This standard applies to measuring instruments subject to state tests in accordance with the requirements of GOST 8.383-80, and establishes the organization, procedure for conducting, processing and reviewing the results of state tests. State tests of medical measuring instruments are carried out in accordance with the requirements of this standard and the "Regulations on the organization and procedure for conducting state tests of medical measuring instruments", approved by the Gosstandard together with the USSR Ministry of Health.

Настоящий стандарт распространяется на средства измерений, подлежащие государственным испытаниям в соответствии с требованиями ГОСТ 8.383-80, и устанавливает организацию, порядок проведения, оформления и рассмотрения результатов государственных испытаний. Государственные испытания средств измерений медицинского назначения проводят в соответствии с требованиями настоящего стандарта и "Положения об организации и порядке проведения государственных испытаний средств измерений медицинского назначения", утвержденного Госстандартом совместно с Министерством здравоохранения СССР

Choose Language: 
Format: Electronic (pdf/doc)

Approved: USSR State Committee for Standards, 6/5/1980

SKU: RUSS71100

Price: $462.00




The Product is Contained in the Following Classifiers:

ISO classifier » 17 METROLOGY AND MEASUREMENTS. PHYSICAL PHENOMENA » 17.020 Metrology and measurements in general »

National standards » 17 METROLOGY AND MEASUREMENTS. PHYSICAL PHENOMENA » 17.020 Metrology and measurements in general »

National Standards for KGS (State Standards Classification) » Latest edition » T General technical and organizational and methodological standards » T8 State measurement system » T81 Metrological rules, norms, regulations and requirements of standard reference data system »

National Standards for KGS (State Standards Classification) » Latest edition » T General technical and organizational and methodological standards » T8 State measurement system » T80 Rules, norms, regulations infield of ensuring uniformity of measurements »


The Document References:

GOST 13.1.002-80: Reprpgraphy. Micrography. Requirements for documents to be microfilmed

GOST 2.103-68: Unified system for design documentation. Stages of designing

GOST 2.106-68: Unified system for design documentation. Textual documents

GOST 2.114-70: Unified system for design documentation. Technical requirements. Rules for lay-out, wording and designing

GOST 2.116-84: Product technical level and quality map

GOST 2.601-68: Unified system for design documentation. Exploitative documents

GOST 2.602-68: Unified system for design documentation. Repair documents

GOST 8.009-84: State system for ensuring the uniformity of measurements. Standardized metrological characteristics of measuring instruments

GOST 8.383-80: State system for ensuring the uniformity of measurements. State tests of means for measurements. General statements

The Document is Referenced By:

GOST 10028-81: Glass capillary viscosimeters. Specifications

GOST 10180-90: Concretes. Methods for strength determination using reference specimens

GOST 10181-2000: Concrete Mixtures Test method

GOST 10181-2014: Concrete mixtures. Methods of testing

GOST 10287-83: Dc electric meters

GOST 10529-86: Theodolites. General specifications

GOST 10708-82: Pendulum impact machines

GOST 10733-79: Mechanical wrist and pocket watches

GOST 10771-82: Electrical filament lamps for light measurements

GOST 10-88: Inside micrometers. Specifications

GOST 11098-75: Gauge callipers with reading arrangement. Specifications

GOST 11196-74: Levels with micrometrical feed of ampule. Specifications

GOST 11268-76: Structural thin sheets of special purpose alloyed high quality steel

GOST 112-78: Meteorological glass thermometers

GOST 11358-89: Dial-type thickness gauges and dial-type wall thickness gauges graduated in 0,01 and 0,1 mm. Specifications

GOST 12.0.005-84: Occupational safety standards system. Metrological support of occupational safety. General

GOST 12.3.016-87: Occupational safety standards system. Building construction anticorrosive protective works. Safety requirements

GOST 12.4.070-79: Occupational safety standards system. Signals of pre-explosive concentrations, thermochemical. General specifications

GOST 12738-77: Glass bulbs with graduated neck. Technical specification

GOST 12936-82: Automobile speedometers with electric drive

GOST 12997-84: SSI Products. General specifications

GOST 13017-83: Surface gravimeters. General specifications

GOST 13033-84: Gsp. Electrical analog equipment and means for automation

GOST 13045-81: Rota meters

GOST 13350-78: Gsp conductivity liquid analyzers

GOST 13494-80: Geodetic protractors

GOST 13717-84: Pressure-operated indicating electrical-contact instruments

GOST 14.306-73: Unified system for technological preparation of production. Engineering control techniques selection rules

GOST 14.307-73: Unified system for technological preparation of production. Rules for selection of the means of technological equipment of testing processes

GOST 14012-76: Tachometric ball-based flowmeters SSE. Specification

GOST 14167-83: Turbine cold water meters

GOST 1435-90: Unalloyed tool steel bars, strips and coils

GOST 14753-82: Indicating and recording pneumatic monitoring instruments of ssi

GOST 15.311-90: System of product development and launching into manufacture. Launching of products under foreign companies technical documents

GOST 1532-81: Viscosimeters of relative viscosity. Specifications

GOST 15581-80: Coupling and power selection capacitors for electricity transmission lines

GOST 1577-93: Plate and broadband roll stock of construction fine steel.

GOST 1578-76: Speedometers with flexible shaft drive for cars and cycles. General technical specifications

GOST 16286-84: Potentiometric transducers SSI. Industrial auxiliary electrodes. Specifications

GOST 16287-77: Glass industrial electrodes for determination hydrogan ion activation SSI. Specifications

GOST 162-90: Depth gauges. Specifications

GOST 164-90: Vernier height gauges. Specifications

GOST 166-89: Vernier callipers. Specifications

GOST 17.0.0.02-79: Nature protection. Metrological assurance of the control over the contamination of the atmosphere, surface waters and soil.

GOST 1701-75: Automobile pressure gauges and automotive pressure indicators. General specifications

GOST 1770-74: Laboratory volumetric glassware. Cylinders, beakers, measuring flasks, test tubes. General specifications

GOST 17772-88: Semiconducting photoelectric detectors and receiving photoelectric devices. Methods of measuring photoelectric parameters and determining characteristics

GOST 18140-84: SSI differential pressure gauges. General specifications.

GOST 18426-73: Taximeters automobile. General specification

GOST 18481-81: Glass hydrometers and cylinders. General specifications

GOST 18518-80: Automatic machines

GOST 18833-73: Lever-gearing measuring heads. Specifications

GOST 18954-73: Gas sampling and storage glass apparatus and tubes (pipettes). Specifications

GOST 19687-84: Electrocardiographs. General specifications

GOST 1983-89: Voltage transformers

GOST 19875-79: Self-recording quickly-responding electrical measuring instruments

GOST 19881-74: Potentiometric analyzers for pH-control of milk and dairy products. General specifications

GOST 20180-91: Radioisotope densitometers for liquid and pulp measuring

GOST 20292-74: Laboratory volumetric glassware. Burettes, pipettes

GOST 20790-82: Medical instruments, apparatus and equipment. General specifications

GOST 21339-82: Tachometers

GOST 21523.3.1-93: Modified wood. Method for determination of heat capacity

GOST 21523.3.2-93: Modified wood. Method for determination of heat conductivity

GOST 21625-76: Digital information-measuring mechanism with stream-jet-convertor for measuring linear sizes

GOST 22018-84: Amperometric analysers for dissolved oxygen SSI. General technical requirements

GOST 22171-90: Laboratory conductometric analysers of liquid. General specifications

GOST 22224-83: Hand flat spring dynamometers. Specifications

GOST 22261-94: Measuring instruments for electrical

GOST 22519.0-77: Thallium. General requirements for the methods of analysis

GOST 22520-85: Pressure, pressure difference and vacuum transmitters with electrical analog output signals gsp

GOST 22521-85: Pressure, vacuum and pressure difference transmitters with pneumatic analogue output signal of gsp (state system of industrial devices and automation systems)

GOST 22524-77: Glass density bottles. Specifications

GOST 22601-77: Control bars. Specifications

GOST 22729-84: SSI fluid analyzers general technical specifications

GOST 22744-84: Flame photometers. General specifications

GOST 22904-93: Reinforced concrete structures. Magnetic method for determining the thickness of the protective layer of concrete and the location of reinforcement

GOST 22975-78: Metals and alloys. Rockwell hardness test under low loads (using Super-Rockwell test)

GOST 23094-78: Glass butyrometers. General specifications

GOST 23118-78: Structural metalwork. General specifications

GOST 23213-84: Locomotive speedometers

GOST 23350-83: Electronic wrist and pocket watches

GOST 23382-78: Piezosorption hygrometers. General specifications

GOST 23474-79: Cable apparatus. General technical requirements, acceptance rules and test methods

GOST 23543-88: Geodesic instruments

GOST 2386-73: Level vials. Specifications

GOST 2405-88: Pressure gauges, vacuum gauges, pressure-vacuum gauges, pressure meters, draft gauges and draft-pressure gauges

GOST 24104-88: General purpose and reference laboratory balances

GOST 24452-80: Concretes. Methods of prismatic compressive strengths, modulus of elasticity and Poisson ratio determination

GOST 24469-80: Instruments for measurements of laser radiation parameters

GOST 24544-81: Concretes. Methods for determining shrinkage and creep deformations

GOST 24545-81: Concretes. Methods of fatigue tests

GOST 24555-81: The state system of testing the production. The procedure of verification of testing equipment. General principle

GOST 24606.0-81: Switches, hardware and electric connectors. General requirements for measuring electric parameters

GOST 2475-88: Wires and rolls

GOST 24855-81: Analog converters for measurement of current, voltage, power, frequency, resistance

GOST 25485-2019: Cellular concrete. General specifications

GOST 25485-89: Cellular concretes. Specifications

GOST 25589-83: Crushed stone, gravel and sand for construction works. Methods for determining the content of sulfuric and sulfur compounds

GOST 25611-83: Dielcometric moisture meters for construction materials. General specifications

GOST 25858-83: Surface density and thickness measures for radioisotope thickness gauges. Specifications

GOST 25865-83: Vibration. Vibration measuring instruments with piezoelectric vibration measuring transducers. Main parameters and technical requirements

GOST 25932-83: Portable radioisotope soil and concrete moisture and density gauges. General specifications

GOST 26.007-85: Measuring and automation devices. Acceptance rules

GOST 26.203-81: Measure-computering complexes. Classification. General requirements

GOST 26116-84: Well-logging apparatus.

GOST 26227-84: Level gauges and sensors of the level of industrial application of GSP. General specifications

GOST 26272-84: Electronic-mechanical wrist and pocket watches

GOST 26364-90: Ferritometers for austenitic steels. General specifications

GOST 26712-94: Organic fertilizers. General requirements for methods of analysis

GOST 26964-86: Rules of state acceptance of products. General principles

GOST 27173-86: Spectrometric units and devices for detection of ionizing radiation

GOST 27451-87: Ionizing radiation measurement instruments

GOST 27540-87: Gas and inflammable vapors thermo-chemical alarms

GOST 27544-87: Liquid-in-glass thermometers. General specifications

GOST 27752-88: Electronic mechanical quartz desktop and wall clocks and alarm clocks

GOST 27987-88: Potentiometric analyzer of liquid, SSI. General specifications

GOST 28066-89: Ssi liquid chamber meters

GOST 28393-89: PM bars and strips of high-speed steel. General specifications

GOST 28723-90: Velocity, electromagnetic and vortex flow meters

GOST 28724-90: Speed gas meters

GOST 28725-90: Instruments for measuring the level of liquids and loose materials

GOST 2875-88: Prismatic measurers of plane angle

GOST 28798-90: Spring measuring heads. General specifications

GOST 28836-90: Resistive strain-gauge

GOST 28840-90: Machines for tension, compression and bending tests of materials

GOST 28841-90: Machines for fatigue testing of materials

GOST 28845-90: Machines for long time strength creep, testing and relaxation of materials. General technical requirements

GOST 29024-91: Turbidimetric and nephelometric liquid analyzers

GOST 29075-91: Nuclear instrumentation systems for nuclear power stations. General requirements

GOST 29226-91: Viscometers for liquids

GOST 30082-93: Zinc-aluminium alloys. Spectral method of analysis

GOST 302-79: Medical maximum glass thermometer. Specifications

GOST 30605-98: Digital voltage and current measuring converters. General specifications

GOST 310.5-88: Cements. Test method for heat of hydration

GOST 3145-84: Mechanical clocks with signal. General specifications

GOST 3309-84: Table and wall mechanical clocks with balance oscillator. General specifications

GOST 3899-81: Transducers with electric contacts for control of linear dimensions. Specifications

GOST 400-80: Glass thermometers for testing of petroleum products. Specifications

GOST 427-75: Measuring metal rules. Basic parameters and dimensions. Specifications

GOST 4380-93: Micrometers with inserts. Specifications

GOST 4381-87: Lever-type micrometers. General specifications

GOST 4543-71: Structural alloyed steel

GOST 5378-88: Vernier protractors. Specifications

GOST 577-68: Clock-type dial indicators graduated in unit divisions of 0,01 mm. Specifications

GOST 6359-75: Meteorological barographs of aneroid type. Specifications

GOST 6376-74: Hand anemometer accounting device. Specifications

GOST 6416-75: Meteorological thermographs with bimetallic sensing elements. Specifications

GOST 6507-90: Micrometers. Specifications

GOST 6746-94: Measures of electrical capacitance. General technical requirements

GOST 6859-72: Apparatus for liquids sampling and measuring. Specifications

GOST 703-76: Wall pendulum mechanical cloсk. General specifications

GOST 7164-78: SSI self-balancing servoinstruments. General specifications

GOST 7193-74: Hand induction anemometer. Specifications

GOST 7328-82: General-purpose and reference mass gages

GOST 7470-92: Micrometric depth meters. Specifications

GOST 7502-89: Measuring metal tapes. Specifications

GOST 7661-67: Dial depth gauges. Specifications

GOST 7746-89: Current transformers. General specifications

GOST 8.002-86: State system for ensuring the uniformity of measurements. State supervision and department control of measuring instruments. Basic regulations

GOST 8.009-84: State system for ensuring the uniformity of measurements. Standardized metrological characteristics of measuring instruments

GOST 8.103-73: State system for ensuring the uniformity of measurements. Organization and carrying out procedure of design and technological documentation metrological examination

GOST 8.326-78: The State Measurement System. Metrological assurance of development, manufacturing and operation of unstandardized measuring instruments. General principles

GOST 8.326-89: State system for ensuring the uniformity of measurements. Metrological certification measuring instruments

GOST 8.383-80: State system for ensuring the uniformity of measurements. State tests of means for measurements. General statements

GOST 8.434-81: State system for ensuring the uniformity of measurements. Humidity of grain and its processing products. Method of carrying out measurements by dielectrometric and resistive moisture gauges

GOST 8335-81: Visual pyrometers with disappearing filament

GOST 868-82: Internal dial gauges graduated in 0,01 mm. Specifications

GOST 8711-78: Ammeters and voltmeters. General technical specifications

GOST 9018-89: Fuel dispensing pumps. General specifications

GOST 9031-75: Reference hardness standards

GOST 9038-90: Gauge blocks. Specifications

GOST 9218-86: Tanks for food liquids mounted on vehicles

GOST 9244-75: Inside callipers graduated in 0,001 and 0,002 mm. Specifications

GOST 9245-79: Measuring direct current potentiometers

GOST 9392-89: Levelling squares and bars. Specifications

GOST 9486-79: Measuring ac bridges

GOST 9696-82: Multi-revolution dial indicators graduated in 0,001 and 0,002 mm. Types. Basic parameters. Specifications

GOST 9898-79: Diaphragm pneumatic actuators SSI. General specifications

GOST 9921-81: Tire hand-operated pressure gauges

GOST 9933-75: Absolute pressure gauges and u-tubes combined pressure vacuum gauges

GOST R 50601-93: Impeller counters for potable water. General specifications

MI 114-77: GSE. Method of calibration of reference devices for calibration of current and voltage transformers

MI 1753-87: Guidelines. State system for ensuring uniformity of measurements. Means of automated calibration. Additional instructions to the composition of the technical specifications and the order of development of prototypes

MI 1862-88: Guidelines. State system of measurement uniformity. Measuring channels of dispatching telecontrol systems of oil and gas production facilities. Typical methodology and program of metrological certification

MI 1864-88: State system for ensuring uniformity of measurements. Fuel dispensers. Method of verification

MI 2002-89: State system for ensuring uniformity of measurements. Information measuring systems. Organization and procedure for metrological certification

MI 675-84: State system for ensuring uniformity of measurements. Methods of conducting state control tests of measuring instruments

MI 858-85: Guidelines. Metrological support of environmental monitoring. Certified mixtures of substances. Main provisions

OST 1-02557-85: Information and measuring systems for statistical breaking strength and endurance checkout. General requirements.

OST 13-26.1-82: System for development and launch of new products. Production of woodworking industries

OST 24.001.22-82: Production planning system. Process discipline maintenance.

OST 68-4-93: Organization and procedure of testing devices of topographic-geodesic purpose.

OTT 08042462: Instruments and automation equipment for nuclear power plants. General technical requirements

POT R M-003-97: Intersectoral rules on labor protection when performing forging and pressing

R 391-80: Guidelines for the metrological assurance of the construction of underwater crossings of main pipelines

R 50-601-10-89: Recommendations. System development and production of products. Application of GOST 15.001-88

R 50-601-11-89: Recommendations. System development and production of products. Organization of the work of the acceptance committee

RD 03-25-2003: Typical program of inspection of the state of construction work at nuclear facilities

RD 153-34.1-37.312-99: Technical Requirements for Automatic Instruments for On-line Chemical Control for Quality Indicators of the Heat-Transfer Agent of the Water-Steam TPS Path

RD 22-207-88: Lifting machines. General requirements and production standards

RD 26-07-268-87: Guidelines. The procedure for the development and certification of non-standard measuring instruments

RD 31.44.01-97: Rules of technical operation of lifting and transport equipment of sea trading ports

RD 34.11.111-89: Methodology instructions. State analysis of metrological industrial support at energy providers and sectoral research institutes

RD 34.35.606: General Guide to Overhaul of Thermal Automation and Measuring Equipment

RD 39-083-91: Unified system for accounting of petroleum gas and its products from the well to the consumer

RD 39-5-649-81: Rules of industrial commissioning of petroleum quantity measuring systems

RD 50-201-86: Guidelines. State system for ensuring uniformity of measurements. The procedure for registration of state tests of measuring instruments

RD 50-234-81: Model regulation on the head organization for state testing of the most important types of products for industrial, cultural, and domestic purposes.

RD 50-262-81: Guidelines. The procedure of metrological examination and certification of methods for qualifying assessment of fuels, oils, lubricants and special fluids

RD 50-286-81: Guidelines. The system of state testing of products. Ensuring the unity of the test. Main provisions

RD 50-363-82: D.C. measuring high-voltage dividers. Methods and means of verification

RD 50-674-88: Methodological instructions. Measurement assurance of quantitative chemical analysis. Main provisions.

RD 50-89-86: Guidelines. Registration of enterprises, organizations and institutions for the right to manufacture, repair and calibration of measuring instruments. Organization and procedure

RD 95 762-91: Metrological expertise of design and technological documentation.

RST RSFSR 506-81: System development and production of products. Garage equipment. Main provisions

RST RSFSR 778-91: Filling stations. General technical requirements

TPr 126-85: Model program for state acceptance testing of range finders

TU 0921-057-01124328-98: New welded railway rails. Technical conditions

TU 0921-077-01124328-99: Old-fashioned repaired welded rails

TU 102-161-77: Coatings weighting reinforced concrete monolithic main pipelines such as PZHU

TU 25-16.0018-84: Magnifier measuring ЛИ-3-10Х

TU 25-1819.0021-90: Mechanical stopwatches "Glory" SDSpr-1-2-000, SDSpr-4b-2-000, SOSpr-6a-1-000

TU 25-1894.003-90: Mechanical stopwatches

VRD 39-1.10-006-2000*: Rules for the technical operation of gas pipelines

Customers Who Viewed This Item Also Viewed:

Special railway rolling stok. Dynamic and strength testing procedures
Language: English
Price: $198.00
Blanks for marine shafts and rudder stocks. Specifications
Language: English
Price: $216.00

YOUR ORDERING MADE EASY!

AzerbaijanLaws.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.

Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.

Placing Your Order

Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. 
Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfill. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.

Your Order Best Quality and Authenticity Guarantee

Your order is provided in electronic format (usually an Adobe Acrobat or MS Word). 
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.

All Codes and Regulations

All Categories

Send us a message Expand Collapse

Leave your message in the form below, and we will write back by e-mail!