PB 10-574-03
ПБ 10-574-03
|
|
Safety Operation and Design Codes for Steam and Hot Water Boilers
Правила устройства и безопасной эксплуатации паровых и водогрейных котлов
Status: Not effective - Not applicable. By order of the Federal Service for Ecological, Technological and Nuclear Supervision dated March 25, 2014 No. 116, the Resolution of the Federal Mining and Industrial Supervision of Russia dated June 11, 2003 No. 88 was deemed to be non-applicable (the order shall enter into force three months after its official publication, the text of the order is published in the Bulletin of normative acts of federal executive bodies of September 22, 2014 No. 38)
The rules apply to: a) steam boilers, including boilers-boilers, as well as autonomous steam superheaters and economizers; b) hot water and steam boilers; c) energy technology boilers: steam and water boilers, including soda recovery boilers (SRK); d) waste heat boilers (steam and hot water); e) boilers of mobile and transportable installations and energy trains; e) steam and liquid boilers working with high-temperature organic heat carriers (HERE); g) steam and hot water pipelines within the boiler. The rules do not apply to: a) boilers, autonomous superheaters and economizers installed on sea and river vessels and other floating equipment (except drags) and objects underwater use; b) heating boilers of railroad cars; c) boilers with electric heating; d) boilers with a volume of steam and water space of 0.001 m3 (1 l) or less, in which the product of the working pressure in MPa (kgf
Правила распространяются на: а) паровые котлы, в том числе котлы-бойлеры, а также автономные пароперегреватели и экономайзеры; б) водогрейные и пароводогрейные котлы; в) энерготехнологические котлы: паровые и водогрейные, в том числе содорегенерационные котлы (СРК); г) котлы-утилизаторы (паровые и водогрейные); д) котлы передвижных и транспортабельных установок и энергопоездов; е) котлы паровые и жидкостные, работающие с высокотемпературными органическими теплоносителями (ВОТ); ж) трубопроводы пара и горячей воды в пределах котла. Правила не распространяются на: а) котлы, автономные пароперегреватели и экономайзеры, устанавливаемые на морских и речных судах и других плавучих средствах (кроме драг) и объектах подводного применения; б) отопительные котлы вагонов железнодорожного состава; в) котлы с электрическим обогревом; г) котлы с объемом парового и водяного пространства 0,001 м3 (1 л) и менее, у которых произведение рабочего давления в МПа (кгс/см2) на объем в м3 (л) не превышает 0,002 (20); д) на теплоэнергетическое оборудование атомных электростанций; е) пароперегреватели трубчатых печей предприятий нефтеперерабатывающей и нефтехимической промышленности.
Choose Language:
Format: Electronic (pdf/doc)
Page Count: 98
Approved: Gosgortekhnadzor of Russia,
6/11/2003
SKU: RUSS19324
The Product is Contained in the Following Classifiers:
Construction (Max) »
Regulations »
Regulatory documents of supervisory authorities »
Regulatory documents of Gosgortekhnadzor »
Construction (Max) »
Regulations »
Regulatory documents of supervisory authorities »
Normative documents of Gosatomnadzor of Russia »
Welding regulations »
Welding work »
Welding regulations »
Main materials »
Welding regulations »
Pipelines »
Welding regulations »
Metal structures »
Welding regulations »
Welding materials »
Welding regulations »
welding equipment »
Welding regulations »
Welding staff »
Welding regulations »
Certification »
Welding regulations »
Documentation »
Welding regulations »
Non-destructive control »
Welding regulations »
Mechanical Testing »
Welding regulations »
Heat treatment »
Welding regulations »
Defects »
Welding regulations »
Assembly devices »
Welding regulations »
Welding work »
Automatic welding »
Welding regulations »
Welding work »
Surfacing »
Welding regulations »
Main materials »
Steel, cast iron »
Welding regulations »
Welding materials »
Electrodes »
Welding regulations »
Welding materials »
Gases »
Technical Supervision »
Section I. Technological, construction, energy supervision and environmental protection regarding limitation of negative anthropogenic impact »
IV. Regulatory legal acts and regulations »
2. Industrial safety »
2.14. Equipment operating under excess pressure of more than 0.07 megapascals or at a water heating temperature of more than 115 degrees Celsius »
PromExpert »
SECTION IV. INDUSTRIAL SAFETY »
II Industrial safety requirements for operation of a hazardous production facility »
2 Special industrial safety requirements for operation of a hazardous production facility »
2.6 Industrial safety requirements for pressure equipment »
ISO classifier »
27 ENERGY AND HEATING TECHNOLOGY »
27.060 Burners. Boilers »
27.060.30 Boilers and heat exchangers »
ISO classifier »
27 ENERGY AND HEATING TECHNOLOGY »
27.120 Nuclear power engineering »
27.120.99 Nuclear energy, other aspects »
ISO classifier »
91 CONSTRUCTION MATERIALS AND CONSTRUCTION »
91.140 Installations in buildings »
91.140.65 Water heating equipment »
The Document is Replaced With:
Order 116: Federal norms and rules in the field of industrial safety "Industrial safety rules for hazardous production facilities where equipment operating under excessive pressure is used"
Order 116: On the approval of the Federal norms and rules in the field of industrial safety "Industrial safety rules for hazardous production facilities using equipment operating under excessive pressure" (as amended on December 12, 2017) (canceled from 01.01.2021 on the basis of the Decree of the Government of the Russian Federation dated 06.08.2020 N 1192)
As a Replacement Of:
PB 03-164-97: Standards for Fabrication of Steam and Hot-Water Boilers, Pressure Vessels, and Steam and Hot Water Piping by Welding
Resolution: Rules for the design and safe operation of steam and hot water boilers
The Document References:
GOST 1050-88: Carbon structural quality steel gauged bars with special surface finish. General specifications
GOST 10702-78: Steel bars, carbon and alloy, structural, for cold extruding and upsetting. Specifications
GOST 10705-80: Electrically welded steel tubes. Specifications
GOST 10706-76: Electrically welded steel line-weld tubes. Technical requirements
GOST 1215-79: Malleable iron castings
GOST 1412-85: Flakish graphite cast iron
GOST 14162-79: Steel tubes of small dimensions (capillary)
GOST 14637-89: Thick sheet rolled stock of normal quality carbon steel
GOST 1577-93: Plate and broadband roll stock of construction fine steel.
GOST 1759.0-87: Bolts, screws, studs and nuts. Specifications.
GOST 1759.4-87: Bolts, screws and studs. Mechanical properties and test methods
GOST 1759.5-87: Nuts. Mechanical properties and test methods
GOST 18968-73: Corrosion-resistant and high temperature steel rods and strips for steam turbine blades
GOST 19281-89: Rolled steel with increased strength. General specifications
GOST 20072-74: Heat-resistant steel
GOST 20295-85: Welded steel pipes for gas and oil pipelines. Technical specifications
GOST 20700-75: Bolts, studs, nuts and washers for flanged and anchor connections, corks and yokes with medium temperature from 0 to 650 °C. Specifications
GOST 23304-78: Bolts, studs, nuts and washers for flanged connections for atomic power plants. Technical requirements. Acceptance. Test methods. Marking, packing, transportation and storage
GOST 380-2005: Common quality carbon steel. Grades
GOST 380-94: Normal quality carbon steel
GOST 4543-71: Structural alloyed steel
GOST 550-75: Seamless steel tubes for petroleum processing and petrochemical industry. Specifications
GOST 5520-79: Carbon, low-alloy and alloy sheet steel for boilers and pressure vessels. Specifications
GOST 5632-72: High-alloy steels and corrosion-proof, heat-resisting and heat treated alloys. Grades
GOST 5949-75: Gauged corrosion-resistant, heat-resistant and high-temperature steel shape
GOST 6996-66: Welded joints. Methods of mechanical properties determination
GOST 7293-85: Cast iron with globular graphite for foundry
GOST 7350-77: Plate, corrosion-resistant, heat-resistant, and high-temperature steel
GOST 8479-70: Structural carbon and alloy steel forgings
GOST 8731-74: Seamless hot-deformed steel pipes. Specifications
GOST 8733-74: Cold-formed and heat-formed seamless steel pipes. Technical requirements
GOST 977-88: Steel castings. General specifications
GOST 9941-81: Seamless cold- and warm-deformed tubes made from corrosion-resistant steel
OST 108.030.113-87: Carbon and alloy steel forgings for thermal and nuclear power stations equipment and pipelines. Technical specifications.
OST 26-2043-91: Bolts, studs, nuts and washers for flanged joints. Technical requirements
PB 03-273-99: Rules for qualification test of welders and welding production specialists
PB 03-440-02: Attestation rules for nondestructive inspection personnel
RD 24.031.120-91: Procedural Guidelines. Quality Standards for System Water and Feed Water in Hot Water Boilers and Maintenance and Monitoring of Water Chemistry
Resolution: Rules for the design and safe operation of steam and hot water boilers
Resolution 1371: Rules for registration of facilities in the state register of hazardous production facilities
TU 14-3-190-82: Seamless steel pipes for boiler plants and pipelines
TU 14-3-808-78: Spiral-welded electrowelded carbon steel pipes 20 for pipelines of nuclear power plants
The Document is Referenced By:
GOST 33260-2015: Pipeline valves. Мetals used in pipeline valves production. Basic requirements for choice of materials
GOST R 53672-2009: Pipeline valves. General safety requirements
GOST R 55018-2012: Pipeline valves for objects of energetics. General specifications
GOST R 55173-2012: Boiler plant. General technical requirements
MDK 4-02.2001: Model Guidelines for Operation of Piped Heat Supply Networks of Public Piped Heat Supply Systems
MU 0397-00.004: Methods of conducting non-destructive testing of parts of the boiler installation PPUA-1600/100
MU 0397-00.008: Method of non-destructive testing of parts for the heating device of the ADPM-12 unit/150-У1
NTP-APK 1.10.16.002-03: Norms of technological design of agricultural enterprises for the production of animal feed
NTP-APK 1.20.02.001-04: Standards for technological design of small confectionery production enterprises
Order 116: Federal norms and rules in the field of industrial safety "Industrial safety rules for hazardous production facilities where equipment operating under excessive pressure is used"
Order 116: On the approval of the Federal norms and rules in the field of industrial safety "Industrial safety rules for hazardous production facilities using equipment operating under excessive pressure" (as amended on December 12, 2017) (canceled from 01.01.2021 on the basis of the Decree of the Government of the Russian Federation dated 06.08.2020 N 1192)
PB: Safety regulations and industrial sanitation for loading and unloading operations on railway transport
PB: Safety regulations and industrial sanitation for the repair and maintenance of railway tracks and structures
PB 06-07-92: Uniform Safety Requirements for Underground Development of Mineral Deposits Using Opencast Method
PB 11-401-01: Safety regulations for gas-handling facilities of metallurgic and coke-chemical industries and enterprises
POT R O 13153-ZhDRM-946-03: Industry rules on labor protection during factory repair of locomotives and freight cars
POT R O-001-2002: Rules on labor protection for printing organizations
POT R O-32-CV-400-96: Labor protection rules for the maintenance and repair of freight cars and refrigerated rolling stock
POT RO-14000-002-98: Ordinance on Safety Assurance for Process Equipment
RD 03-29-93: Instructional Guidelines For Engineering Certification of Steam and Hot-Water Boilers, Pressure Vessels, Steam and Hot-Water Pipelines
RD 10-165-97: Methodological guidelines for supervision of water-chemical regime of steam and hot water boilers. Series 17. Issue 32.
RD 10-179-98: Procedural Guidelines for Development of Instructions and Process Charts for Operation of Upstream Water Treatment Facilities and Water Chemistry Control for Steam and Hot Water Boilers
RD 10-210-98: Procedural Guidelines for Technical Inspection of Metal Structures of Steam and Hot Water Boilers
RD 10-249-98: Strength calculation norms for stationary boilers and steam and hot water pipelines.
RD 10-319-99: Model Guidelines for Safe Practices for Boiler Plant Personnel
RD 10-69-94: Typical technological process of installation electrical equipment. Main provisions.
RD 153-34.0-37.411-2001: Procedural Guidelines for In-Service Steam-Oxygen Cleaning and Passivation of Inner Surfaces of Power Generating Equipment
RD 153-34.1-35.523-2002: Methodical instructions for rational application of control & monitoring hardware on tpp boiler-and-turbine equipment, with installed tp acs
RD 24.031.121-2012: Equipping steam stationary boilers with devices for sampling steam and water
RD 32-CSR-110/34-03: Guidance document. Labor protection during the operation of buildings and structures and the repair and construction work at railway facilities
RD 34.03.351-93: Rules for Explosion Safety When Using Fuel Oil As Fuel in Boiler Plant
RD 34.10.126-94: Instructions for operational control of assembly processes, welding and heat treatment.
RD-APK 1.10.07.04-17: Guidelines for the technological design of veterinary and sanitary utilization plants
RD-APK 1.10.07.06-08: Guidelines for the technological design of veterinary and sanitary utilization plants
RD-APK 1.10.17.01-15: Guidelines for technological design of enterprises for the production of animal feed
Resolution: Rules for the design and safe operation of steam and hot water boilers
SNiP 12-03-99: Occupational safety in construction part one. General safety requirements
SO 01-05-AKTNP-002-2004: On automation and telemechanization of installations of pipeline transportation system of oil products of JSC "AK" Transnefteprodukt "
SO 34.04.623-2006: Job description of the head of the gas service of thermal power plants and boiler rooms
SO 34.04.625-2006: Job description of the person responsible for the safe operation of the gas economy of thermal power plants and boiler rooms
SO 34.20.514-2005: Guidelines for the operation of the gas economy of thermal power plants
SO 34.23.501-2005: Guidelines for the operation of fuel oil facilities of thermal power plants
SO 34.26.731: Recommendations for improving the reliability of operation of boiler control valves and reducing power consumption for driving electric feed pumps at cross-link thermal power plants
SO 34.37.536-2004: Guidelines for the use of anti-scaling and corrosion inhibitors OEDFC, AFON 200-60A, AFON 230-23A, PAF-13A, IOMS-1 and their analogues tested and certified by RAO UES of Russia in energy utilities
SP 255.1325800.2016: Buildings and structures. Operating rules. General provisions
SP 41-104-2000: Design of independent heat supply sources
SP 42-101-2003: The general provision and construction gas distribution sistem from steel and polyethyelene pipes
SP 89.13330.2012: Combustion boiler systems of heating generation
ST TsKBA 008.1-2007: Pipe fittings. Calculation and evaluation of reliability indicators and assigned indicators at the design stage. Part 1. Method of calculating and evaluating reliability indicators and assigned indicators at the design stage
ST TsKBA 014-2004: Pipe fittings. Steel castings. General technical conditions
ST TsKBA 025-2006: Pipe fittings. Welding and quality control of welded joints. Technical requirements
ST TsKBA 045-2009: Pipe fittings. Welding and surfacing of parts made of titanium and titanium alloys. Technical requirements and quality control
ST TsKBA 089-2010: Pipe fittings. Welding defects castings. Technical requirements
TU 5728-006-93978201-2008: Sealing gaskets made of thermally expanded graphite (PUTG). Technical conditions
VNTP 81-85: Norms of technological design for petroleum-refining and organic synthesis products manufacture enterprises
VRD 39-2.5-082-2003: Rules for the technical operation of gas filling stations for compressor stations
|
Customers Who Viewed This Item Also Viewed:
 |
Special railway rolling stok. Dynamic and strength testing procedures
Language: English |
Blanks for marine shafts and rudder stocks. Specifications
Language: English |
 |
|
YOUR ORDERING MADE EASY!
AzerbaijanLaws.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience.
Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfill. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.
