GOST 15140-78

ГОСТ 15140-78

Paintwork materials. Methods for determination of adhesion

Материалы лакокрасочные Методы определения адгезии

Status: Effective - Supersedes. The limitation of the effectiveness period has been lifted: Protocol No. 3-93 of the IGU dated 03.03.93 (IUS 5-6-1993)

The standard applies to paints and varnishes and establishes methods for determining the adhesion of paint coatings to metal surfaces: 1 - the method of exfoliation; 2 - method of lattice cuts; 3 - the method of lattice cuts with a back kick; 4 - method of parallel cuts. The standard does not apply to lacquer coatings whose layer thickness exceeds 200 microns, in terms of methods of lattice cuts, lattice cuts with a back kick and parallel cuts.

Стандарт распространяется на лакокрасочные материалы и устанавливает методы определения адгезии лакокрасочных покрытий к металлическим поверхностям: 1 - метод отслаивания; 2 - метод решетчатых надрезов; 3 - метод решетчатых надрезов с обратным ударом; 4 - метод параллельных надрезов. Стандарт не распространяется на лакокрасочные покрытия, толщина слоя которых превышает 200 мкм, в части методов решетчатых надрезов, решетчатых надрезов с обратным ударом и параллельных надрезов.

Choose Language: 
Format: Electronic (pdf/doc)
Page Count: 12

Approved: State Committee of Standards of the Council of Ministers of the USSR, 5/18/1978

SKU: RUSS16538

Price: $63.00

English keywords: lucky; paints; paints and varnishes;



The Product is Contained in the Following Classifiers:

Construction (Max) » Standards » Other state standards used in construction » 87 Paint and varnish industry »

PromExpert » SECTION I. TECHNICAL REGULATION » V Testing and control » 4 Testing and control of products » 4.9 Testing and control of chemical and industrial products » 4.9.3 Products of paint and varnish industry »

ISO classifier » 87 PAINT AND VARNISHING INDUSTRY » 87.040 Paints and varnishes »

National standards » 87 PAINT AND VARNISHING INDUSTRY » 87.040 Paints and varnishes »

National Standards for KGS (State Standards Classification) » Latest edition » L Chemical products and rubber-asbestos products » L1 Inorganic chemical products » L19 Test methods. Packaging. Marking »


As a Replacement Of:

GOST 15140-69: Pain and lacquer materials. Methods for determination of adhesion

The Document References:

GOST 16523-89: Rolled sheets from carbon quality and ordinary steel for general purposes

GOST 16523-97: Rolled sheets from quality and ordinary carbon steel for general purposes. Specifications

GOST 2768-84: Acetone technical. Specifications

GOST 4765-73: Pain and lacquer materials. Method of determination impact resistance

GOST 4784-74: Wrought aluminium and aluminium alloys. Grades

GOST 4784-97: Aluminium and wrought aluminium alloys. Grades

GOST 5638-75: Copper roll foil for technical purposes. Specifications

GOST 618-73: Aluminum foil for technical purposes. Specifications

GOST 8481-75: Aircraft fabrics made of glass twisted complex threads. Specifications

GOST 859-2001: Copper. Grades

GOST 8832-76: Paintwork materials. Methods for formation of paint coating for testing

The Document is Referenced By:

GOST 10144-74: Enamels ХV-124 and ХV-125. Specification

GOST 10144-89: Enamels XB-124Specifications

GOST 10280-83: Electrical household vacuum cleaners

GOST 10982-75: Write enamel ЭП-148 for refrigerators and other electrodomestic devices. Specifications

GOST 11214-2003: Windows of wood with glass. Specifications

GOST 12.4.026-2015: Occupational safety standards system. Signal colors, safety signs and marking. Purpose and rules of use. Safety colors, safety signs and signal marking. Methods of tests

GOST 12034-77: Enamels MЛ-165, MЛ-165ПM and MC-160. Specifications

GOST 12707-77: Wash primers. Specifications

GOST 12936-82: Automobile speedometers with electric drive

GOST 13276-79: Overhead line hardware. General specifications

GOST 14147-80: Varnish ФЛ-559. Specifications

GOST 1578-2017: Speedometers with flexible shaft drive for cars and cycles. Technical requirements and test methods

GOST 1578-76: Speedometers with flexible shaft drive for cars and cycles. General technical specifications

GOST 15907-70: Varnishes ПФ-170 and ПФ-171. Specifications

GOST 15943-80: Electrical insulating enamel ЭП-91. Specifications

GOST 16302-79: Primer ФЛ-086. Specifications

GOST 1701-75: Automobile pressure gauges and automotive pressure indicators. General specifications

GOST 17151-2019: Utensils made of sheet aluminum. General specifications

GOST 17151-81: Cooking utensils made

GOST 17280-79: Window boards, wooden. Specification

GOST 18099-78: Enamels ML-152. Specifications

GOST 18335-83: Enamel НЦ-184. Specifications

GOST 18374-79: Enamels XB-110 and XB-113. Specifications

GOST 18856-81: Apparatuses for inhalation anesthesia and artificial pulmonary ventilation

GOST 19024-79: Enamels AC-182. Specifications

GOST 19263-73: Mains busways up to 1200 V, dc. General technical conditions

GOST 19569-89: Steam medical sterilizers

GOST 19597-94: Garden rakes

GOST 19598-95: Lawn-and-garden hoes, grub-axes and cultivators

GOST 19734-80: Input control devices for residential and public buildings

GOST 19930-91: Sewing domestic machines. General specifications

GOST 20219-74: Water flow gas heaters for domestic purposes

GOST 20481-80: Enamels MЛ-1110. Specifications

GOST 2056-77: Sectional bed for military men. Specifications

GOST 20783-81: Metal trays for wiring

GOST 20803-81: Metal boxes designed for electric wiring

GOST 20804-81: Profiles bent and stripes perforated of steel for wiring. General specifications

GOST 21227-93: Enamels ПФ-218. Specifications

GOST 21824-76: Enamels Xc-119 And Xc-119e Specifications

GOST 22224-83: Hand flat spring dynamometers. Specifications

GOST 22233-2001: Aluminium alloy extruded sections for translucent envelopes. General specifications

GOST 22233-2018: Aluminium alloy extruded sections for translucent envelopes. Specifications

GOST 22340-89: Medical electrical water stills

GOST 22369-77: Enamels ЭП-567. Specifications

GOST 22438-85: Enamels ЭП-525. Specifications

GOST 23.301-78: Products wear resistance assurance. Instruments for evaluating wear by the method of cut notches. Technical requirements

GOST 23123-78: Silvery enamel KO-83. Specifications

GOST 23143-78: Enamels ЭП-773. Specifications

GOST 23143-83: Enamels ЭП-773. Specifications

GOST 23166-78: Wooden windows

GOST 23166-99: Windows. General specifications

GOST 23171-78: Enamel AK-512. Specifications

GOST 23173-78: Garden barrows. General technical conditions

GOST 23173-96: Garden wheel barrows

GOST 23343-78: Primer ГФ-0119. Specifications

GOST 2346-78: Enamel BT-123. Specification

GOST 23494-79: Primer XC-059, enamels XC-759, varnish XC-724. Specifications

GOST 23599-79: Enamels type ЭП-255 and ЭП-275. Specifications

GOST 23707-95: Small tools for tillage

GOST 23760-79: Enamels MЧ-145. Specifications

GOST 23846-79: Refrigerator cores for main railways of 1520 (1524) mm gauge. Paint coatings. Specifications

GOST 24145-80: Domestic containers for bread. General specifications

GOST 24201-80: Connective and fastening components of glass pipelines

GOST 24595-81: Primer B-MЛ-0143. Specifications

GOST 24699-2002: Windows of wood with glass and glassing units. Specifications

GOST 24700-99: Windows of wood with glassing units. Specifications

GOST 24784-81: Enamels ПФ-188. Specifications

GOST 25097-2002: Windows from wood and aluminium. Specifications

GOST 25129-2020: Primer GF-021. Specifications

GOST 25129-82: Primer GF-031. Specifications

GOST 25130-82: Luminescent fire protective wood coating. Technical requirements

GOST 25148-82: Stationary dental units

GOST 25287-82: Suspension for lubricating film formation BНИИ НП-209. Specifications

GOST 25366-82: Enamel ЭП-5116. Specifications

GOST 25483-82: Garden watering-pots. Specifications

GOST 25483-95: Garden watering pots

GOST 25718-83: Primers AK-069 and AK-070. Specifications

GOST 25749-2005: Metal winding lids. General specifications

GOST 25779-90: Toys. General safety requirements and control methods

GOST 25812-83: Steel pipe mains. General requirements for corrosion protection

GOST 26138-84: Elements of built-in furniture and entresol for residential buildings. Specifications

GOST 26141-84: Amplifiers of x-ray images for medical roentgen apparatuses

GOST 26145-84: X-ray medical cassettes

GOST 26221-84: Scattering suppressing linear rasters for medical roentgen apparatuses

GOST 26346-84: Lighting buses for the ac voltage up to 660 v

GOST 26368-90: Medical light fixtures

GOST 26828-86: Instrumentation and machine building products. Marking

GOST 27037-86: Paint materials. Method of determination of stability to temperature changes

GOST 27271-2014: Paint and varnish materials. The method of determining the viability of multi-component systems

GOST 2744-79: Line accessories. Acceptance rules and methods of tests

GOST 28131-89: Dentist` s chairs

GOST 28310-89: Solar collector. General specifications

GOST 28603-90: Devices for uhf-therapy

GOST 28613-90: Paint coatings of bicycles, motor cycles, scooters, motor bicycles. General requirements and methods of control

GOST 28703-90: Automatic and semi-automatic instruments for indirect measurement of arterial pressure

GOST 28965-91: Zipper. Methods of checking

GOST 29150-91: Accessories for products of light industry. Methods of checking

GOST 30154-94: Domestic gas ranges for tourists. General specifications

GOST 30246-2016: Rolled thin-walled metal sheet with protective and decorative paintwork for building structures. Specification

GOST 30246-94: Continuously rolled sheet steel with paint coating for Building

GOST 30662-99: Rust converters. Methods of tests of paint coatings protective properties

GOST 307.2-95: Electric irons for household and similar use. Methods for measuring the performance

GOST 30734-2000: Roof wooden window blocks. Specifications

GOST 30777-2001: Turned, reclined and turned-reclined devices for windows and balcony doors. Specifications

GOST 30777-2012: Turned, reclined, turned-reclined and sliding devices for windows and balcony doors. Specifications

GOST 30894-2003: Production well head equipment. General technical requirements

GOST 31173-2003: Steel doors. Specifications

GOST 31174-2003: Gates of metall. General specifications

GOST 31174-2017: Gates of metall. General specifications

GOST 31284-2004: Air heaters for industrial and agricultural enterprises. General specifications.

GOST 31448-2012: Steel pipes with defensive covering for main gas and oil pipelines. Specifications

GOST 31471-2011: Panic and emergency exit devices. Specifications

GOST 32017-2012: Products and systems for the protection and repair of concrete structures. Requirements for systems for concrete protection in the course of repair works

GOST 32395-2013: Distribution boards for dwelling-houses. General specifications

GOST 32396-2013: Input-distributional boards for dwellings and public buildings. General specifications

GOST 32397-2013: Distribution boards for industrial and social buildings. General specifications

GOST 32522-2013: Polypropylene woven sacks. General specifications

GOST 32829-2014: Automobile roads of general use. Road marking materials. Methods of testing

GOST 32948-2014: Automobile roads of general use. Supports of road signs. Technical requirements

GOST 33128-2014: Automobile roads of general use. Road restraint systems. Technical requirements

GOST 33146-2014: Automobile roads of general use. Pipes for road culvert. Control methods

GOST 33290-2015: Paint materials used in building. General specifications

GOST 33354-2015: Paint materials being in contact with food products. General specifications

GOST 33416-2015: Metal rolling covers. General specifications

GOST 33417-2015: Plastic packaging for household use. General specifications

GOST 33669-2015: Vehicles. Cardan gears of vehicles with joints of unequal angle speeds. General technical requirements

GOST 34339-2017: Motor vehicles. Hydraulic telescopic shock absorbers. Technical requirements and test methods

GOST 34405-2018: Metal prefabricated cans. General specifications

GOST 34428-2018: Photoluminescent evacuation systems. General specifications

GOST 34452-2018: Disconnectors for the traction network of railways and their drives. General specifications

GOST 34473-2018: Pipe fittings. Cranes spherical steel all-welded for water thermal networks. General technical conditions

GOST 34610-2019: Pipe fittings. Electric drives. General specifications

GOST 3940-2004: Automotive engineering electrical equipment. General specifications.

GOST 3940-84: Electrical equipment for vehicles and tractors. General technical requirements

GOST 4.223-83: Quality ratings system. Building. Parquet articles. Nomenclature of characteristics

GOST 4025-95: Domestic meat mincers. Specifications

GOST 475-78: Wooden doors. General specifications

GOST 5088-2005: Hinges for windows and doors. Specifications

GOST 5105-82: Steel fuel and oil tanks

GOST 538-2001: Locks and building hardware. General specifications

GOST 538-2014: Locks and building hardware. General specifications

GOST 5971-78: Enamels for instruments. Specifications

GOST 6465-76: Enamels PF-115. Specifications

GOST 6572-91: Paint Coatings Of Tractors And Agricultural Machinery General Specifications

GOST 6745-79: Enamel ГФ-1426. Specifications

GOST 6815-79: Mains and distribution busways up to 1000 V a.c. General specifications

GOST 6993-79: Enamels HV-1100. Specification

GOST 7313-75: Enamels ХВ-785 and lacquer XB-784. Specifications

GOST 7409-2018: Freight cars. Requirements to paint coatings and corrosion protection and methods of their control

GOST 7742-77: Headlamps of working lighting for tractors and agricultural machines. General specifications

GOST 7930-73: Enamels НЦ-1125. Specifications

GOST 8051-83: Domestic washing machines

GOST 8242-88: Profiled details from wood and wood materials for building. Specifications

GOST 8591-76: The telephone canalization cable man-hole hatches

GOST 8594-80: Installation boxes for switches and plug sockets for flush wiring

GOST 862.3-86: Floor parquet products. Parquet boards. Technical requirements

GOST 862.4-87: Floor parquet products. Parquet panels. Technical requirements

GOST 8709-82: Light boards for industrial and public buildings

GOST 8832-76: Paintwork materials. Methods for formation of paint coating for testing

GOST 8904-2014: Hard wood-fibre boards varnish and paint coatings. Specifications

GOST 8904-81: Hard wood-fibre boards with varnish and paint coatings. Specifications

GOST 9.083-78: Unified system of corrosion and ageing protection. Paint coatings. Accelerated test methods for durability in liquid corrosive mediums

GOST 9.401-91: Unified system of corrosion and ageing protection. Paint coatings. General requirements and methods of accelerated tests on resistance to the action of climatic factors.

GOST 9.403-80: Unified system of corrosion and ageing protection. Paint coatings. Test methods for resistance to liquid static effect

GOST 9.404-81: Unified corrosion and ageing protection system. Coatings for paintwork intended for use in areas with cold climate. General requirements and methods of accelerated testing

GOST 9.406-84: Unified system of corrosion and ageing protection. Organic-silicate coatings. Technical requirements and methods of tests

GOST 9.410-88: Unified system of corrosion and ageing protection. Powder polymeric coatings. Typical technological processes

GOST 9.602-2005: Unified system of corrosion and ageing protection. Underground constructions. General requirements for corrosion protection

GOST 9.602-2016: Unified system of corrosion and ageing protection. Underground constructions. General requirements for corrosion protection

GOST 9109-81: Primers ФЛ-03k and ФЛ-03Ж. Specifications

GOST 9198-83: Enamels of types НЦ-11 and НЦ-11А. Specifications

GOST 926-82: Enamels ПФ-133. Specifications

GOST 9355-81: Primer HS-010. Enamel HS-710. Lacquer HS-76. Specification

GOST 9372-80: Spools for ink ribbons of typewriters. Specifications

GOST 9413-78: Lighting panels for dwelling-houses. General specifications

GOST 9640-85: Enamels ЭП-51. Specifications

GOST 9754-76: Enamels MЛ-12 type. Specifications

GOST 9921-81: Tire hand-operated pressure gauges

GOST R 12.2.143-2002: Occupational safety standards system. Photoluminescent evacuation systems. Elements of systems. Classification. General technical requirements. Methods of tests

GOST R 12.2.143-2009: Occupational safety standards systems. Photoluminescent evacuation systems. Requirements and methods of test

GOST R 12.3.047-98: Occupational safety standards system. Fire safety of technological processes. General requirements. Methods of control

GOST R 12.4.026-2001: Occupational safety standards system. Safety colors, safety signs and signal marking. Purpose and rules of application. General technical requirements and characteristics. Test methods

GOST R 22.3.14-2018: Safety in emergency situations. Collective protective equipment. Air cleaning devices filtering. General technical requirements. Test methods

GOST R 22.3.15-2018: Safety in emergency situations. Collective protective equipment. Air regeneration devices. General technical requirements. Test methods

GOST R 50500-93: Paints and varnishes. Bend test (conical mandrel)

GOST R 50577-2018: Licence plates for vehicles. Types and main sizes. Technical requirements

GOST R 50577-93: Licence plates for vehicles. Types and main sizes. Technical requirements

GOST R 50962-96: Plastics vessels and articles for economic purposes. General specifications

GOST R 51037-97: Protective polymer coatings for insulation, localization, localization dust suppression and deactivation. General technical requirements

GOST R 51155-2017: Line accessories. Acceptance rules and test methods

GOST R 51155-98: Line accessories. Acceptance rules and methods of tests

GOST R 51164-98: Steel pipe mains. General requirements for corrosion protection

GOST R 51177-2017: Overhead line hardware. General technical requirements

GOST R 51177-98: Overhead line hardware. General specifications

GOST R 51595-2000: Non-traditional power engineering. Solar power engineering. Solar collectors. General specifications

GOST R 51628-2000: Distribution boards for dwelling-houses. General specifications

GOST R 51691-2000: Paint materials. Enamels. General specifications

GOST R 51691-2008: Paint materials. Enamels. General specifications

GOST R 51693-2000: Anticorrosion primers. General specifications

GOST R 51720-2001: Polymeric sacks. General specifications

GOST R 51732-2001: Input-distributional boards for dwellings and public buildings. General specifications

GOST R 51760-2001: Polymeric consumers packagings. General specifications

GOST R 51778-2001: Distribution boards for industrial and social buildings. General specifications

GOST R 51966-2002: Radioactive contamination. Technical facilities for decontamination. General technical requirements

GOST R 52020-2003: Water dispersible paint materials. General specifications

GOST R 52165-2003: Paint materials. Varnishes. General specifications

GOST R 52230-2004: Electrical equipment for vehicles and tractors. General specifications

GOST R 52290-2004: Traffic control devices. Traffic signs. General technical requirements

GOST R 52430-2005: Vehicles. Cardan gears of vehicles with joints of unequal angle speeds. General technical requirements

GOST R 52491-2005: Coating materials, used in building. General specifications

GOST R 52564-2006: Polypropylene woven sacks. General specifications

GOST R 52568-2006: Steel pipes with defensive covering for main gas and oil pipelines. Specifications

GOST R 52576-2006: General use highways. Road marking materials. Test methods

GOST R 52750-2007: Panic and emergency exit devices. Specifications

GOST R 52767-2007: Automobile roads of the general use. Road facilities. Methods for determination of parameters

GOST R 52868-2007: Cable tray systems and cable ladder systems for cable management. General technical requirements and test methods

GOST R 53051-2008: Machinery and tools for digging out and selection of seedlings and saplings in nursery forests. Test methods

GOST R 53052-2008: Machinery and tools for preparation of fillings for making foresting. Test methods

GOST R 53202-2008: Paint materials being in contact with food products. General specifications

GOST R 53223-2008: Chrysotile cement slabs for wall facing. Specifications

GOST R 53223-2016: Chrysotile cement slabs for wall facing. Specifications

GOST R 53653-2009: Paint materials. Method for determination of the pot life of multicomponent systems

GOST R 53832-2010: Vehicles. Heat exchangers and thermostats. Technical requirements and test methods

GOST R 54784-2011: Testing agricultural tractors and machines. Methods for estimation of technical parameters

GOST R 54893-2012: Passenger cars on locomotive traction and motor-cars. Lacquer and antidischarge coating reguirements.

GOST R 55511-2013: Pipeline valves. Electric actuators. General specifications

GOST R 55883-2013: Disconnections for railways traction network and operating mechanisms for them. General specifications

GOST R 56177-2014: Controlled door closing devices (door closers). Specifications

GOST R 56613-2015: Production of non-combustible and rotting modified wood. Specifications

GOST R 56674-2018: Casting cookware of aluminum alloys with non-stick coating. General specifications

GOST R 56963-2016: Locomotives. Lacquer and antidischarge coating requirements and methods of their control

GOST R 57430-2017: Pipes, fitting from ductile iron with spherical graphite and their connections for trade oil pipelines. Specifications

GOST R 58174-2018: Basket trolleys. Specifications

GOST R 58197-2018: The procedure of the examination of the quality of motor vehicles. General requirements

GOST R 58351-2019: General automobile roads. Frontal road fences, holding lateral combined and holding pedestrian. General technical requirements. Testing and control methods. Application rules

GOST R 58699-2019: Wood-aluminum window blocks. Technical conditions

GOST R 58700-2019: Wooden windows and balcony doors for low-rise residential buildings. Types, Design and Dimensions

GOST R 702.5.005-2020: Russian quality system. Children's beds. Consumer testing

Manual: Manual for impulse and low consumption fire extinguishing systems

Manual for MGSN 2.09-03: Corrosion protection of concrete and reinforced concrete structures of transport facilities

Manual for SNiP 2.03.11-85: A manual for monitoring the state of building metal structures of buildings and structures in aggressive environments, conducting surveys and designing the restoration of corrosion protection of structures

Manual for SNiP 2.03.11-85: Designer's Guide to Corrosion Protection for Concrete and Reinforced Concrete Structures

Manual for SNiP 2.03.11-85: Manual on the design of corrosion protection for stone, reinforced stone and asbestos-cement structures

MDS 13-20.2004: Comprehensive methods for the inspection and energy audit of reconstructed buildings. Design Guide

MU 1.3.3.99.0123-2012: The use of flame retardants for steel structures, cables and cable routes in the construction of nuclear power plants. Quality control of work performance, determination of flame retardant efficiency and acceptance rules for operation.

NPB 238-97: Fire retardant cables coatings. General technical requirements and test methods

ODM 218.2.001-2009: Recommendations for the design and construction of culverts of metal corrugated structures on public roads, taking into account regional conditions (road-climatic zones)

ODM 218.2.023-2012: Recommendations for the use of fast-hardening materials for the repair of cement concrete pavements

ODM 218.2.044-2014: Recommendations for the performance of instrument and instrumental measurements in assessing the technical condition of bridge structures on highways

ODM 218.2.087-2017: Recommendations for the design and construction of culverts of spiral-wavy metal corrugated pipes

ODM 218.3.042-2014: Recommendations for determining the parameters and assignment of categories of defects in assessing the technical condition of bridges on highways

ODM 218.4.001-2008: Guidelines for the organization of inspection and testing of bridge structures on highways

ODM 218.4.002-2009: Recommendations for protection against corrosion of structures used on the roads of the Russian Federation bridges, fences and road signs

ODM 218.6.030-2017: Recommendations for establishing and warranty periods and service life of structural elements of bridge structures

OSN-APK 2.10.03.001-04: Designing the integrated protection of reinforced concrete structures of industrial agricultural buildings and structures from the effects of corrosive environments

OST 26.260.18-2004: Process modules for oil and gas industry. General technical specifications

OST 26.260.758-2003: Metal structures. General technical requirements.

OST 26-18-5-88: Technological units of gas and oil industry. General technical requirements.

OST 92-9440-81: Conducting lacquer coating. Technical requirements and typical technological processes.

PNST 310-2018: Roads are public. Bridges and pipes road. Methods for determining the geometric and physical parameters

R 429-81: Corrosion Protection Guide for Pipe Fittings and Piping Nodes

RD 153-34.0-20.518-2003: Standard instructions on protection of heat supply system pipelines against external corrosion

RD 153-34.1-21.324-98: Method for Inspection of Wall Enclosures of Buildings and Structures at Thermal Power Stations

RD 153-34.1-40.504-00: Procedural Guidelines for Optimal Corrosion Protection of Storage Tanks and Protection of the Water in Them Against Aeration

RD 153-34.2-31.604-2002: Recommendations on technological issues of repair and reconstruction of the chambers of impellers of hydraulic units in order to increase their operational reliability

RD 153-39.4-078-01: Operation Requirements for Tanks on Trunk Petroleum Product Pipelines and at Petroleum Depots

RD 24.202.03-90: Weatherproof lacquer coating for oil and gas processing equipment. Technical requirements.

RD 302-07-16-91: General purpose pipeline valves. Paint coatings. General technical conditions

RD 34 02.028-2007: Technical rules. Mechanical equipment and special steel structures for hydraulic structures. Manufacturing, installation and acceptance.

RD 34.20.325: Procedural Guidelines for Bench Tests of Anticorrosion Coatings for Underground Heat Distribution Lines

RD 34.20.518-95: Standard Guidelines on External Corrosion Protection of Piped Heat Distribution Systems

RD 39-0147103-328-86: Process Guidelines for Application of Polymer Protective Coatings on the Interior Surface of Field Water Pipes Used for Transport of a Medium Containing Sulfur (Up to 100 mg/liter)

RD 39-30-1093-84: Methodology for the accelerated assessment of the service life of polymer coatings to protect oilfield equipment from corrosion

RD 39-3-387-80: Guidelines on Selection and Application of Paints/Coatings and Coating Systems for Interior Insulation of Piping for Field Water Flooding Systems

RD EO 1.1.2.09.0772-2008: Methods of assessing the technical condition and resource characteristics of systems and means of fire protection of nuclear power units

RD EO 1.1.2.09.0772-2012: Methods of assessing the technical condition and resource characteristics of systems and fire protection ?a nuclear power plants

Recommendations: Aspiration smoke-sensitive alarms VESDA. Part 1. Scope

RMG 116-2011: State system for ensuring the uniformity of measurements. Tanks of main oil lines and oil storage depots. Maintenance operations and metrological assurance under operating conditions

RSN 40-81: Instructions for use of organosilicate compositions for corrosion protection of metal and other building structures, process equipment and decoration finishes of the building materials and facades of buildings

RST RSFSR 131-87: Metal folding beds. Technical conditions

RST RSFSR 328-89: Metal stationery cabinets. General technical requirements

RST RSFSR 516-88: Eaves metal. Technical conditions

RST RSFSR 643-80: Black steel economic dishes . General specifications

RST RSFSR 698-83: Ovens made of sheet steel. Technical conditions

SanPiN 1.2.681-97: Hygienic requirements for production and safety of perfumes and cosmetics

SNiP 3.04.03-85: Protection of construction structures and facilities from corrosion

SNiP 3.06.04-91: Bridges and pipes

SO 34.49.505-2003: Regulations for fire retardant coating for building constructions of buildings and facilities of power engineering enterprises

SP 284.1325800.2016: Instructions for design, construction and redesign of field oil and gas pipelines

SP 34-116-97: Instructions For Design, Construction and Redesign of Field Oil and Gas Pipelines

SP 349.1325800.2017: Concrete and reinforced concrete structures. Rules of structural reinforcement and repair

SP 432.1325800.2019: Fireproof coatings. Condition Monitoring

SP 46.13330.2012: Bridges and pipes

SP 470.1325800.2019: Steel structures. Work Rules

SP 53-101-98: Manufacturing and quality control of steel structures for construction

SP 79.13330.2012: Bridges and culverts. Rules of examination and test

SP 86.13330.2012: Main pipelines

SP 86.13330.2014: Main (Trunk) pipelines

ST RK GOST R 50962-2008: Dishware and household products of plastic. General specification

ST TsKBA 015-2005: Pipe fittings. The program of quality control of fittings of nuclear power plants

ST TsKBA 079-2010: General purpose pipeline valves. Paint coatings. General technical conditions

ST TsKBA 087-2010: Pipe fittings. Electric drives. General technical conditions

ST TsKBA 090-2013: Pipe fittings. Pneumatic actuators and hydraulic actuators. General technical conditions

STB 1015-97: Cultural and general, and household products made of plastic. General specifications

STB 1517-2004: Plastic consumer packaging. General specifications

STB 1520-2008: Materials for the horizontal marking of roads. Technical conditions

STB 1679-2006: Cultivators for inter-row tillage. General specifications

STB 1686-2006: Road vehicles. Automobile cardan transmissions with joints for unequal angular velocities. General specifications

STB 1839-2009: Technical means of traffic management. Anti-dazzle screens. General specifications

TR 149-03: Technical recommendations on the technology of using the complex of specialized finishing materials for the renovation of external and internal surfaces during reconstruction and major repairs of buildings

TR 165-05: Technical recommendations on the establishment of durability (service life) of building materials and products

TR 174-05: Technical Recommendations for Determining the Durability of Finishing and Lining Materials

TR 84-98: Technical recommendations for the application of finishing systems of paints and varnishes on exterior wall panels that are molded "face down"

TR 85-98: Technical recommendations on input quality control of materials used for facade finishing

TR 89-99: Technical recommendations for the manufacture and use of building paints and varnishes from the Inteko system for factory and construction conditions

TR 94.11-05: Technological regulation of the operational quality control of construction, installation and special works during the construction of buildings and structures. 11. Painting and wallpaper production

TR 94.11-99: Standard Procedure for Operational Quality Control of Construction, Installation, and Military Construction Work During Construction of Buildings and Structures. 11: Painting and Wallpapering

TSN 66-301-99: Requirements for Paints and Coatings Used in Construction Practices in the Moscow Region

TsPI 6/32: Technological indications of the coloring of metal structures of railway bridges in operation

TU 102-107-76: Boxes of unified with hinged panels of BNP type (construction part of block-boxes)

TU 1390-008-86695843-2011: Steel pipes with internal smoothing coating for gas pipelines

TU 1390-015-86695843-2011: Steel pipes with Stelrant external anticorrosion polyurethane coating

TU 1394-006-86695843-10: Steel pipes with epoxy protective coating

TU 1394-011-86695843-2011: Steel pipes with an external two-layer epoxy coating resistant to ultraviolet radiation. Technical conditions

TU 2311-042-21743165-2005: Varnish "Yarly" V-PL-1120. Technical conditions

TU 2312-075-21743165-2005: Enamel "YARLI" V-MA-1232. Technical conditions

TU 3-120-81: Expansion Bellows, Axial , Loaded. Technical Specifications

TU 3449-006-17416124-00: Cable welded trays. Technical conditions

TU 36-1496-85: Cable prefabricated structures. Technical conditions

TU 36-2072-86: Boxes of lingering. Technical conditions

TU 5361-002-39430024-07: Hardwood boards

TU 5768-005-47114136-02: Steel pipes insulated with polyurethane foam in a polyethylene protective sheath for oil and gas pipelines

TU 6-10-741-79: PF-167 enamel of various colors

VSN 008-88: Construction of trunk and field pipelines. Anticorrosion and heat insulation

VSN 345-86: Use of Epoxy-Shale Coatings for Waterproofing and Corrosion Protection of Steel Piping and Steel and Reinforced Concrete Structures of Industrial Occupancies and Sewage System Facilities

VSN 36-86: Installation of Lining in Underground Hydraulic Structures Constructed in Rocky Permafrost Soils

VSN 436-82: Guidelines for Application of Organosilicate Composites for Protective Coatings for Steel Piping of Piped Heat Distribution Systems

VSN 446-84: Guidelines for Use of Paints and Coatings for Factory-Applied Corrosion Protection of Structural Steel

VSN 4-94: Industry-Specific Building Code for Installation of Heating Supply Networks with Pipes Insulated with Cold-Applied Heat-Resistant Bitumen-Rubber Mastic

Customers Who Viewed This Item Also Viewed:

Special railway rolling stok. Dynamic and strength testing procedures
Language: English
Price: $198.00
Blanks for marine shafts and rudder stocks. Specifications
Language: English
Price: $216.00

YOUR ORDERING MADE EASY!

AzerbaijanLaws.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.

Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.

Placing Your Order

Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. 
Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfill. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.

Your Order Best Quality and Authenticity Guarantee

Your order is provided in electronic format (usually an Adobe Acrobat or MS Word). 
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.

All Codes and Regulations

All Categories

Send us a message Expand Collapse

Leave your message in the form below, and we will write back by e-mail!