GOST 12.1.038-82

ГОСТ 12.1.038-82

Occupational safety standards system. Electric safety. Maximum permissible values of pick-up voltages and currents

Система стандартов безопасности труда Электробезопасность Предельно допустимые значения напряжений прикосновения и токов

Status: Effective. The limitation of effectiveness has been lifted: Protocol No. 2-92 of the IGU dated 05.10.92 (IUS 2-1993)

The standard establishes the maximum permissible values of contact voltages and currents flowing through the human body, designed to design ways and means to protect people when they interact with electrical installations for industrial and domestic purposes of direct and alternating current at 50 and 400 Hz.

Стандарт устанавливает предельно допустимые значения напряжений прикосновения и токов, протекающих через тело человека, предназначенные для проектирования способов и средств защиты людей, при взаимодействии их с электроустановками производственного и бытового назначения постоянного и переменного тока частотой 50 и 400 Гц.

Choose Language: 
Format: Electronic (pdf/doc)
Page Count: 8

Approved: USSR State Committee for Standards, 6/30/1982

SKU: RUSS16338

Price: $17.82




The Product is Contained in the Following Classifiers:

Construction (Max) » Standards » Other state standards used in construction » 13 Environmental protection, protection of people from environmental exposure. Security »

Technical Supervision » Section I. Technological, construction, energy supervision and environmental protection regarding limitation of negative anthropogenic impact » IV. Regulatory legal acts and regulations » 5. Safety of electrical and thermal installations and networks » 5.2. Safety of electrical installations and networks »

Evidence base (TR CU, Technical Regulation of the Customs Union) » 019/2011 TR CU. On safety of personal protective equipment » Regulations and standards (to ТР ТС 019/2011) »

PromExpert » SECTION IV. INDUSTRIAL SAFETY » II Industrial safety requirements for operation of a hazardous production facility » 3 Energy security » 3.4 Requirements for operation of power plants and networks »

PromExpert » SECTION III. LABOR PROTECTION AND SAFETY » III Occupational safety requirements for production equipment and processes » 2 Safety requirements for certain types of work » 2.10 Operation of electrical installations, electrical equipment and power tools »

PromExpert » SECTION III. LABOR PROTECTION AND SAFETY » II Industrial sanitation and occupational health » 6 Protection against electromagnetic radiation » 6.1 Non-ionizing electromagnetic fields and radiation »

ISO classifier » 13 ENVIRONMENTAL PROTECTION, HUMAN PROTECTION AGAINST ENVIRONMENTAL IMPACT. SECURITY » 13.260 Protection against electric shock. Means of protection »

National standards » 13 ENVIRONMENTAL PROTECTION, HUMAN PROTECTION AGAINST ENVIRONMENTAL IMPACT. SECURITY » 13.260 Protection against electric shock. Means of protection »

National Standards for KGS (State Standards Classification) » Latest edition » T General technical and organizational and methodological standards » T5 Documentation System » T58 System of standards infield of nature conservation and improvement of use of natural resources, labor safety, scientific organization of labor »


The Document References:

GOST 12.1.009-76: Occupational safety standards system. Electrical safety. Terms and definitions

GOST 12.1.019-79: Occupational safety standards system. Electric safety. General requirements and nomenclature of kinds of protection

The Document is Referenced By:

GOST 10921-2017: Radial and axial fans. Methods of aerodynamic tests

GOST 10921-90: Radial and axial fans. Aerodynamic testing methods

GOST 11004-84: Principal ventilation mine blowers

GOST 11163-84: Gas-discharge devices. General specifications

GOST 12.1.009-2017: Occupational safety standards system. Electrical safety. Terms and definitions

GOST 12.2.042-2013: Occupational safety standards system. Machines and technological equipment for live-stock-raising and forage production. General safety requirements

GOST 12.2.042-91: Occupational safety standards system. Machines and technological equipment for livestock raising and forage production.

GOST 12.2.112-86: Occupational safety standards system. Mine electric locomotive transport. General requirements for rolling stock

GOST 12.2.124-2013: Occupational safety standards system. Alimentary product equipment. General safety requirements

GOST 12.2.124-90: The food industry equipment

GOST 12.2.139-97: Agricultural machinery. Maintenance-production equipment. General safety requirements

GOST 12.2.231-2012: Occupational safety standards system. Polygraphic equipment. Safety requirements and test methods

GOST 12.3.003-86: Occupational safety standards system Electric welding works. Safety requirements

GOST 12.3.013-77: Occupational safety standards system. Type-writing works. General safety requirements

GOST 12.3.032-84: Occupational safety standards system. Electric installation works. General safety requirements

GOST 12.3.042-88: Occupational safety standards system. Woodworking manufacture. General safety requirements

GOST 12.4.155-85: Earth leakage circuit breakers

GOST 12.4.276-2014: Occupational safety standards system. Protective equipment for legs. Special shoes for protection from electromagnetic field. General technical requirements and test methods

GOST 12.4.283-2014: Occupational safety standards system. Safety set for protection from electrical shock. General technical requirements and test methods

GOST 13.1.512-97: Reprography. Micrography. Readers. General specifications

GOST 13033-84: Gsp. Electrical analog equipment and means for automation

GOST 15607-84: Baudot code start-stop apparatuses for alphabetic telegraphy

GOST 17261-77: Zinc. Spectral method of analysis

GOST 19734-80: Input control devices for residential and public buildings

GOST 20680-2002: Mechanical mixing devices (agitated vessels). General specifications

GOST 21021-2000: Numerical control units. General technical requirements

GOST 21021-85: Digital programmed control devices

GOST 21339-82: Tachometers

GOST 22520-85: Pressure, pressure difference and vacuum transmitters with electrical analog output signals gsp

GOST 26035-83: Electronic meters of an alternating-current electricity

GOST 27451-87: Ionizing radiation measurement instruments

GOST 27537-87: Digital indicators

GOST 27750-88: Restoring coatings. Coating thickness control methods

GOST 28139-89: School equipment. General safety requirements

GOST 28298-2016: Grounding mine electrical installations. Technical requirements and control methods

GOST 28298-89: Mine equipment earthing. Check methods and specifications

GOST 28723-90: Velocity, electromagnetic and vortex flow meters

GOST 28725-90: Instruments for measuring the level of liquids and loose materials

GOST 28775-90: Gas pumping units driven with gas turbine. General specifications

GOST 28840-90: Machines for tension, compression and bending tests of materials

GOST 28841-90: Machines for fatigue testing of materials

GOST 28845-90: Machines for long time strength creep, testing and relaxation of materials. General technical requirements

GOST 29024-91: Turbidimetric and nephelometric liquid analyzers

GOST 29226-91: Viscometers for liquids

GOST 29328-92: Stationary gas turbines for turbo generators. General technical requirements

GOST 30331.3-95: Electrical installations of buildings. Part 4. Protection for safety. Protection against electric shock

GOST 30608-98: Tin bronzes. Method of X-ray fluorescent analysis

GOST 30609-98: Brass castings. Method of X-ray fluorescent analysis

GOST 31528-2012: Machines and equipment for munufacturing of sugar. Safety requirements

GOST 31529-2012: Machinery and equipment for bread baking industry. Safety requirements

GOST 31636.2-2012: Safety in electroheat installations. Part 2. Particular requirements for resistance heating equipment

GOST 31817.1.1-2012: Alarm systems. Part 1. General requirements. Section 1. General

GOST 33322-2015: Railway rolling stock. Requirements for protection against electrical hazards

GOST 34425-2018: Cooling liquids. Method for determination of methyl alcohol content

GOST 6625-85: Mine local ventilating fans

GOST 9.401-2018: Unified system of corrosion and ageing protection. Paint coatings. General requirements and methods of accelerated tests on resistance to the influence of climatic factors

GOST 9.401-91: Unified system of corrosion and ageing protection. Paint coatings. General requirements and methods of accelerated tests on resistance to the action of climatic factors.

GOST R 12.2.133-97: Occupational safety standards system. Polygraphic equipment. Safety requirements and test methods

GOST R 50014.2-94: Safety in electrical heating installations. Part 2. Particular requirements for resistance heating equipment

GOST R 50571.3-94: Electrical installations of buildings. Part 4. Protection for safety. Protection against elecric shock

GOST R 50612-93: Machines and equipment for manufacturing of sugar. Safety requirements

GOST R 50620-93: Machinery and equipment for bread baking industry. Safety requirements

GOST R 50775-95: Alarm systems. Part 1. General requirements. Section 1. General

GOST R 50911-96: Agricultural machinery. Maintenance-production equipment. General safety requirements

GOST R 51186-98: Alarm sonic passive glass break detectors for use in buildings. General technical requirements and methods of tests

GOST R 51649-2000: Heat meters for water heat supply systems. General specifications

GOST R 51918-2002: The equipment for care of coordinates through the vertical mine. General technical requirements and test methods

GOST R 52435-2005: Technical means of intruder alarm systems. Classification. General technical requirements and test methods

GOST R 52435-2015: Alarm intruder technical means. Classification. General technical requirements and test methods

GOST R 52860-2007: Physical protection systems. General technical requirements

GOST R 52889-2007: Non-destructive testing. Ultrasound measurement of screw tightening forces. General requirements

GOST R 52890-2007: Non-destructive testing. Evaluation of stresses in material of pipelines by ultrasound. General requirements

GOST R 52932-2008: Electromagnetic, ultrasonic, vortex and fluid oscillator counters for water heat supply systems. General specifications

GOST R 53198-2008: Ores and concentrates of non-ferrous metals. General requirements for methods of chemical analysis

GOST R 53205-2008: Non-destructive testing. Evaluation of grains size of steel by ultrasound. General requirements

GOST R 53237-2008: Fiber glass. General requirements for safety in the course of Production and Application

GOST R 53568-2009: Non-destructive testing. Evaluation of third order elasticity modulus by ultrasound. General requirements

GOST R 53966-2010: Non-destructive testing. Evaluation of mechanical stresses in constructions material. General requirements for the order of methods choice

GOST R 54317-2011: Launching and technical complexes of space-rocket complexes. Safety requirements

GOST R 54403-2011: Stationary gas turbines for drive of turbogenerators. General specifications

GOST R 54404-2011: Gas pumping units driven with gas turbine. General specifications

GOST R 54487-2011: Non-destructive testing. Evaluation of gas porosity in aluminium casting alloys by ultrasound. General requirements

GOST R 54799-2011: Railway rolling stock. Requirements of protection against electrical hazards

GOST R 54811-2011: Electromobiles. Test methods for active and passive safety

GOST R 55042-2012: Non-destructive testing. Evaluation of metallic coating thickness by ultrasound. General requirements

GOST R 55044-2012: Technical diagnostics. Selection of test items for the calibration of equipment for measuring the stress-strain state of structural materials. General requirements

GOST R 55046-2012: Technical diagnostics. Evaluation of residual resource of long used steel pipelines on the basis of samples mechanical tests results. General requirements

GOST R 55047-2012: Technical diagnostics. Without standards calibration of equipment for measuring the stress-strain state of structural materials. General requirements

GOST R 55168-2012: Stationary gas turbine plants' air intake ducts. General technical requirements

GOST R 55196-2012: Gas turbines of low capacity for turbogenerators. General technical requirements

GOST R 55805-2013: Non-destructive testing. Ultrasonic monitoring of texture in rolled steel sheets. General requirements

GOST R 55806-2013: Non-destructive testing. Ultrasound measurement of bonding strength of layers in bimetal. General requirements

GOST R 55807-2013: Non-destructive testing. Ultrasonic monitoring of internal straight pipe threads. General requirements

GOST R 56185-2014: Technical diagnostics. Evaluation of stresses in sides of pressure vessels by ultrasound. General requirements

GOST R 56186-2014: Technical diagnostics. Evaluation of a status of long used rails by acoustic method. General requirements

GOST R 56187-2014: Technical diagnostics. Ultrasonic monitoring of steel overheating sheets. General requirements

GOST R 56232-2014: Determination of B«stress-strainB» diagram in the course of ball instrumental indentation. General requirements

GOST R 56306-2014: Silver. Method of inductively coupled plasma atomic-emission analysis

GOST R 56663-2015: Non-destructive testing. Quality control of engineering products by residual magnetization formed during their manufacture. General requirements

GOST R 56664-2015: Non-destructive testing. Evaluation of stress state material engineering products by acoustoelastic methods. General requirements

GOST R 56665-2015: Non-destructive testing. Ultrasonic method for determining the residual stresses in the railway wheel rims. General requirements

GOST R 56666-2015: Technical diagnostics. Acoustic method of diagnostics and evaluation a residual resource of side frames trucks wagons. General requirements

GOST R 56667-2015: Technical diagnostics. Acoustic method for assessing conditions of high-speed wagons. General requirements

GOST R 57154-2016: Technical diagnostics. Monitoring of mechanical and heat npp equipment. General requirements

GOST R 57172-2016: Technical diagnostics. Determination of surface residual stresses by method of instrumental indentation. General requirements

GOST R 57173-2016: Calculation and strength testing. Methods of mechanical testing of metals. Test for stress relaxation of metals and alloys at a compression. General requirements

GOST R 57223-2016: Technical diagnostics. Evaluation of steel pipelines condition under the parameters of the deformation relief in operation. General requirements

GOST R 57283-2016: Calculation and strength testing. Acoustic method for determination of damage under thermocyclic fatigue of steel. General requirements

GOST R 57284-2016: Calculation and strength testing. Acoustic method for determination of damage under low-cycle fatigue of steel. General requirements

GOST R 57736-2017: Mining equpment. Mine auxiliary fans. General specifications

GOST R 58232-2018: Railway infrastructure objects. Complex protection against lightning and transient surges. General requirements

GOST R 58320-2018: Electrical installation of traction power supply systems of the DC railway. Grounding Requirements

GOST R 58321-2018: Electrical installation of traction power supply systems of the AC railway. Grounding Requirements

GOST R 58599-2019: Technical diagnostics. Diagnostics of steel structures. Magnetic coercimetric method. General requirements

GOST R 58882-2020: Grounding devices. Potential equalization systems. Earthing switches. Grounding conductors. Technical requirements

GOST R 8.823-2013: State system for ensuring the uniformity of measurements. Meters for hot water. General metrological and technical requirements

GOST R 8.919-2016: State system for ensuring the uniformity of measurements. Reference systems for certification reference materials composition of magistral natural gas and substitute natural gas. The method of verification

GOST R IEC 60990-2010: Methods of measurement of touch current and protective conductor current

Indication O-1515u: Recommendations for planning labor protection measures in railway transport

M61900: Recommended Practice for Grounding and Electrical Safety Measures in Electric Power Facilities With Voltage up to 1 kV in Industrial Facilities

M64996: Alphanumeric Designations in Electrical and Engineering Design Documentation

Manual: Manual for impulse and low consumption fire extinguishing systems

MDS 13-6.2000: Method for the Determination of Unfitness of Residential Occupancies and Dwelling Units for Occupation

MI 2537-2000: State system for ensuring uniformity of measurements. Thermal energy of open water heating systems, received by the consumer. Measurement Technique

MI 2538-99: State system for ensuring uniformity of measurements. Heat meters for water systems water supply COP ***. General metrological requirements

MI 2728-2002: State system for ensuring uniformity of measurements. The list of regulatory documents on security requirements. The order of their application in the normative documents of the ICE

MI 2808-2003: Recommendation. State system for ensuring uniformity of measurements. The amount of electrical energy. Measurement technique for the distribution of unbalances in the wholesale electricity market

MI 2846-2003: State system for ensuring uniformity of measurements. The amount of electrical energy and power. The method of measurement in the branches of OJSC Tyumenenergo

MUK 4.1.1674-03: Measurement of concentration of dimethylamine in water by gas chromatographic method

MUK 4.1.2102-06: Measurement of the mass concentration of selenium in the urine using atomic absorption spectrometry

MUK 4.1.2971-12: Determination of melamine in the water of water bodies of drinking and household water using high performance liquid chromatography

NPB 179-99: Fire engineering. Protection switching-off devices for fire appliances. General technical requirements. Test methods

OST 32.146-2000: Devices of railway automation, telemechanics and telecommunications. General specification requirements

OST 45.147-99: Payphones. General technical requirements

OST 45.179-2001: Fixed electrical installations of unattended regeneration points of fiber-optic transmission lines. General technical requirements

OST 45.183-2001: stationary Installations of Electrical power of electrical connection apparatus. General technical requirements.

OST 45.37-86: Organization of works regarding telephone repair.

OST 45.62-97: Linear equipment of subscriber lines of office and industrial automatic telephone exchanges. Operating standards

PI 1.4.75-2000: Arc welding in shielding gases of structural, stainless and heat-resistant steels and alloys

PNAE G-7-014-89: Standardized methods of testing of basic materials (semifinished products, weld joints and surfacing of equipment and piping of npp. Ultrasonic inspection. Part I. Control of basic materials (semifinished products)

PNST 159-2016: Automatic information and measuring system of commercial accounting of electric energy. General specifications

POT R M-003-97: Intersectoral rules on labor protection when performing forging and pressing

POT R M-015-2000: Intersectoral labor protection regulations for the operation of freon refrigeration units

POT R M-016-2001: Inter-Industry Occupational Safety and Health Regulations (Safety Regulations) for Operation of Electrical Installations

POT R M-018-2001: Intersectoral labor protection rules when applying metal coatings

POT R M-022-2002: Intersectoral rules on labor protection during soldering and tinning of products

POT R O 00030171: Labor protection rules during the operation of navigable hydraulic structures

POT R O 29-001-93: Labor protection regulations for printing companies

POT R O-00-97: Occupational Safety and Health Requirements in the Pulp and Paper and Rosin Industry

POT R O-97300-06-95: Rules for labor protection in the sugar industry of the food industry

POT RZhD 4100612-TsSh-074-2015: Rules for labor protection during maintenance and repair of signaling, centralization and blocking devices at Russian Railways

PUE: Electrical Installation Rules (PUE). Chapter 1.1 General (Seventh Edition)

PUE: Electrical Installation Rules (PUE). Chapter 1.2 Electricity supply and electrical networks (Seventh edition)

PUE: Electrical Installation Rules (PUE). Chapter 1.7 Grounding and Electrical Safety Precautions (Seven Edition)

PUE: Electrical Installation Rules (PUE). Chapter 1.9 Insulation of electrical installations (Seventh edition)

PUE: Electrical Installation Rules (PUE). Chapter 7.6 Electric Welding Machines (Seven Edition)

PUE: Electrical Installation Rules (PUE). Chapter 7.10. Electrolysis Plants and Plating Plants (Seventh Edition)

PUE: Electrical Installation Rules (PUE). Chapter 1.8. Acceptance Test Standards (Sixth Edition)

PUE: Electrical Installation Rules (PUE). Chapter 4.1. Switchgears up to 1 kV AC and up to 1.5 kV DC (Sixth Edition)

PUE: Electrical Installation Rules (PUE). Chapter 1.1. General part (Sixth edition)

PUE: Electrical Installation Rules (PUE). Chapter 1.2. Electricity supply and electrical networks (Sixth edition)

PUE: Electrical Installation Rules (PUE). Chapter 1.3. Selection of conductors by heating, economic current density and by corona conditions (Sixth edition)

PUE: Electrical Installation Rules (PUE). Chapter 1.4. Selection of electrical devices and conductors for short circuit conditions (Sixth edition)

PUE: Electrical Installation Rules (PUE). Chapter 1.5. Electricity metering (Sixth edition)

PUE: Electrical Installation Rules (PUE). Chapter 1.6. Electrical Measurements (Sixth Edition)

PUE: Electrical Installation Rules (PUE). Chapter 1.7. Grounding and Electrical Safety Precautions (Sixth Edition)

PUE: Electrical Installation Rules (PUE). Chapter 2.1. Electrical Wiring (Sixth Edition)

PUE: Electrical Installation Rules (PUE). Chapter 2.2. Busducts up to 35 kV (Sixth Edition)

PUE: Electrical Installation Rules (PUE). Chapter 2.3. Cable lines with voltage up to 220 kV (Sixth edition)

PUE: Electrical Installation Rules (PUE). Chapter 2.4. Overhead power lines with voltage up to 1 kV (Sixth edition)

PUE: Electrical Installation Rules (PUE). Chapter 2.5. Overhead power lines with voltage above 1 kV (Beginning) (with Amendments and additions) (Sixth edition)

PUE: Electrical Installation Rules (PUE). Chapter 3.1. Protection of electrical networks with voltage up to 1 kV (Sixth edition)

PUE: Electrical Installation Rules (PUE). Chapter 3.2. Relay Protection (Sixth Edition)

PUE: Electrical Installation Rules (PUE). Chapter 3.3. Automation and telemechanics (Sixth edition)

PUE: Electrical Installation Rules (PUE). Chapter 3.4. Secondary Circuits (Sixth Edition)

PUE: Electrical Installation Rules (PUE). Chapter 4.2. Switchgears and substations with voltages above 1 kV (Sixth edition)

PUE: Electrical Installation Rules (PUE). Chapter 4.3. Converter substations and installations (Sixth edition)

PUE: Electrical Installation Rules (PUE). Chapter 4.4. Battery Units (Sixth Edition)

PUE: Electrical Installation Rules (PUE). Chapter 5.1. Electrical machine rooms (Sixth edition)

PUE: Electrical Installation Rules (PUE). Chapter 5.2. Generators and Synchronous Compensators (Sixth Edition)

PUE: Electrical Installation Rules (PUE). Chapter 5.3. Electric motors and their switching devices (Sixth edition)

PUE: Electrical Installation Rules (PUE). Chapter 5.4. Crane Electrical Equipment (Sixth Edition)

PUE: Electrical Installation Rules (PUE). Chapter 5.5. Elevator Electrical Equipment (Sixth Edition)

PUE: Electrical Installation Rules (PUE). Chapter 5.6. Condensing Units (Sixth Edition)

PUE: Electrical Installation Rules (PUE). Chapter 6.1. General part (Seventh edition)

PUE: Electrical Installation Rules (PUE). Chapter 7.1. Electrical equipment of residential, public, administrative and domestic buildings (Seventh edition)

PUE: Electrical Installation Rules (PUE). Chapter 6.2. Interior lighting (seventh edition)

PUE: Electrical Installation Rules (PUE). Chapter 6.3. Outdoor lighting (Seventh edition)

PUE: Electrical Installation Rules (PUE). Chapter 6.4. Advertising Lighting (Seventh Edition)

PUE: Electrical Installation Rules (PUE). Chapter 6.5. Lighting fixtures, installation devices (Seventh edition)

PUE: Electrical Installation Rules (PUE). Chapter 7.2. Electrical installations of entertainment enterprises, clubs and sports facilities (Seventh edition)

PUE: Electrical Installation Rules (PUE). Chapter 7.3. Electrical Installations in Hazardous Areas (Sixth Edition)

PUE: Electrical Installation Rules (PUE). Chapter 7.4. Electrical Installations in Fire Hazardous Zones (Sixth Edition)

PUE: Electrical Installation Rules (PUE). Chapter 7.5. Electrothermal Plants (Sixth Edition)

PUE: Electrical Installation Rules (PUE). Chapter 7.6. Electric welding machines (sixth edition)

PUE: Electrical Installation Rules (PUE). Chapter 7.7. Peat electrical installations (Sixth edition)

PUE: Electrical Installation Rules (PUE). Chapter 2.5. Overhead power lines with voltages above 1 kV (End) (Sixth edition)

PUE: Electrical Installation Rules (PUE). Applications

PUE: Electrical Installation Rules (PUE). Chapter 6.6. Lighting devices and wiring devices (Seventh edition)

PUE: Electrical Installation Rules (PUE). Chapter 6.1. General part (Sixth edition)

PUE: Electrical Installation Rules (PUE). Chapter 6.2. Interior lighting (Sixth edition)

PUE: Electrical Installation Rules (PUE). Chapter 6.3. Outdoor Lighting (Sixth Edition)

PUE: Electrical Installation Rules (PUE). Chapter 6.4. Advertising Lighting (Sixth Edition)

PUE: Electrical Installation Rules (PUE). Chapter 6.5. Lighting fixtures, installation devices (Sixth edition)

PUE: Electrical Installation Rules (PUE). Chapter 7.1. Electrical Equipment for Residential and Public Buildings (Sixth Edition)

PUE: Electrical Installation Rules (PUE). Chapter 7.2. Electrical equipment for entertainment enterprises, clubs and sports facilities (Sixth edition)

PUE: Electrical Installation Rules (PUE). Chapter 2.4. Overhead power lines with voltage up to 1 kV (Seventh edition)

PUE: Electrical Installation Rules (PUE). Chapter 2.5. Overhead power lines with voltage above 1 kV (Seventh edition) (with Amendment)

PUE: Electrical Installation Rules (PUE). Chapter 4.1. Switchgears up to 1 kV AC and up to 1.5 kV DC (Seventh Edition)

PUE: Electrical Installation Rules (PUE). Chapter 4.2. Switchgears and substations with voltages above 1 kV (Seventh edition)

PUE: Electrical Installation Rules (PUE). Chapter 1.8. Acceptance test standards (Seventh edition)

R 50-601-21-92: Recommendations. Establishment of product safety requirements in standards and technical conditions

RD 12.23.102-85: Mountain cars. Method for establishing values of noise and vibration characteristics

RD 153-34.0-04.185-2003: Machines and equipment for construction, technical re-equipment and repair of energy facilities. Requirements for design, materials, manufacturing, acceptance and testing

RD 153-34.0-11.209-99: Recommended Practice. Automated Electric Energy and Power Monitoring and Metering Systems. Standard Method for Measurements of Electric Energy and Power

RD 153-34.1-17.461-00: Methodological guidelines for penetrant testing of welded joints, weld pads and parent metal during manufacturing, installation, operation and repairing of power equipment.

RD 31.6.07-2002: Instructions for maintenance of navigation equipment of marine approach channels and harbour areas.

RD 34.11.333-97: Standard Method for Measurements of Quantity of Electrical Energy

RD 34.11.334-97: Standard Method for Measurements of Electrical Power

RD 34.17.440-96: Procedural Guidelines for Assessment of Individual Service Life of Steam Turbines and Prolongation of Their Operational Life Beyond the Individual Service Life of Steam Turbines and Prolonging Their Operational Life Beyond The Equipment Service Life

RD 39-0147103-338-88: Temporary standards for the design of electric heating above-ground main pipelines (Axial electric heating system of ASE)

RD 45.080-99: Equipment of digital subscriber access transmission systems. Technical requirements

RD 50-700-91: Guidelines. Industrial particle accelerators. General requirements for the measurement of parameters

RD 51-0158623-07-95: The use of a new generation of power plants with a piston and gas turbine drive

RD EO 0505-03: Instructions for metal styloscope

RD IATs 2.004-97: Passenger and freight elevators. Guidelines for testing insulation resistance, protective earth and loop phase-zero

RST RSFSR 728-85: Basic Laboratory Equipment for Analysis of Potable Waters and City Wastewaters. General Requirements

SNiP 2.05.09-90: Tram and trolleybus lines

SO 153-34.03.603-2003: Guidelines for Use and Testing of Protective Means Used in Electrical Installations

SP 12-133-2000: Safety in construction. Statutes on the procedure for certification of work stations by working conditions in construction and housing and utilities.

SP 98.13330.2012: Tram and trolleybus lines

SP 98.13330.2018: Tram and trolley lines

ST RK 1447-2005: Pre-stressed reinforced concrete sleepers for railway with gage 1520 mm. General specification

STB 1568-2005: Occupational safety standards system. Printing equipment. Safety requirements and test methods

TI R M-074-2002: Interindustry typical regulations on labor protection during operation of electrical installations, electrical measurements and tests TI RM-(062-074)-2002

TR 174-05: Technical Recommendations for Determining the Durability of Finishing and Lining Materials

TU 3681-134-00220302-2007: Air coolers block-modular complete AVG-KB. Technical specifications

VNTP 01-87: Guidelines for Process Design of Pasta Industry Facilities

VNTP 02-92: Norms of technological design of bakery industry enterprises. Part I. Bakeries

VNTP 02-92: Norms of technological design of bakery industry enterprises. Part II Bakeries

Customers Who Viewed This Item Also Viewed:

Steel structures
Language: English
Price: $297.00
Technical regulations of the Eurasian Economic Union "On requirements for fire safety and fire extinguishing means"
Language: English
Price: $126.72
Concrete with polysterene aggregates. Specifications
Language: English
Price: $308.76
Steel welded vessels and apparatus. General technical conditions
Language: English
Price: $108.90
Guidance on the selection of precautionary statements for the labelling in accordance with GOST 31340-2013
Language: English
Price: $301.95
Billet of rotor shafts and rings of turbine generators
Language: English
Price: $1,487.33
Vessels and apparatus. Norms and methods of strength calculation. Calculation of cylindrical and conical shells, convex and flat bottoms and covers
Language: English
Price: $287.10
Seismic building design code
Language: English
Price: $594.00
Aviation fuel for gas turbine engines JET A-1 (Jet A-1). Specifications
Language: English
Price: $150.66
On the approval of federal norms and rules in the field of industrial safety "General explosion safety rules for explosive and fire hazardous chemical, petrochemical and oil refining industries"
Language: English
Price: $819.95
Safety valves of stream and hot-water boilers. Technical requirements
Language: English
Price: $57.42
Steam and hot-water boilers
Language: English
Price: $47.52
Machines, instruments and other industrial products. Modifications for different climatic regions. Categories, operating, storage and transportation conditions as to environment climatic aspects influence
Language: English
Price: $173.25
Rules of Electrical Installations Design (Russian Electrical Code). 7th Edition. All sections and exhibits
Language: English
Price: $478.76
Buildings and structures foundations
Language: English
Price: $495.00
Pile foundations
Language: English
Price: $519.75
Basic norms of interchangeability. General tolerances. Limit deviations for linear and angular dimensions without tolerance indications
Language: English
Price: $37.62
General requirements for machines, instruments and other industrial products as to environment mechanical stability
Language: English
Price: $175.23
Safety rules for ground storage of liquid ammonia
Language: English
Price: $145.53
Radio communications. Broadband wireless access equipment. Requirements for the radio spectrum parameters, electromagnetic compatibility and safety
Language: English
Price: $1,318.92

YOUR ORDERING MADE EASY!

AzerbaijanLaws.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.

Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.

Placing Your Order

Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. 
Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfill. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.

Your Order Best Quality and Authenticity Guarantee

Your order is provided in electronic format (usually an Adobe Acrobat or MS Word). 
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.

All Codes and Regulations

All Categories

Send us a message Expand Collapse

Leave your message in the form below, and we will write back by e-mail!