RD 34.17.435-95

РД 34.17.435-95

Methodological instructions. Technical diagnostics of boilers with working pressure up to 4.0 MPa inclusive.

Методические указания. Техническое диагностирование котлов с рабочим давлением до 4,0 МПа включительно.

Status: Effective

The guidance document applies to steam boilers, including boilers-boilers, economizers, water and steam boilers with a working pressure up to 4.0 MPa inclusive and a working environment temperature up to 450 ° С and establishes the basic requirements for the organization and rules of technical diagnostics, its frequency, zones, methods and volumes, norms and criteria for assessing the quality of the main elements of the boilers within and after the assigned service life, as well as after the accident. The provisions of this sectoral regulatory document are subject to mandatory application at the enterprises of the electric power industry and can be used by enterprises and associations of enterprises located on the territory of the Russian Federation whose composition (structure), regardless of ownership and subordination, includes thermal power plants and boilers.

Руководящий документ распространяется на паровые котлы, в том числе котлы-бойлеры, экономайзеры, водогрейные и пароводогрейные котлы с рабочим давлением до 4,0 МПа включительно и температурой рабочей среды до 450 °С и устанавливает основные требования к организации и правилам проведения технического диагностирования, его периодичность, зоны, методы и объемы, нормы и критерии оценки качества основных элементов котлов в пределах и по истечении назначенного срока службы, а также после аварии. Положения настоящего отраслевого нормативного документа подлежат обязательному применению на предприятиях отрасли «Электроэнергетика» и могут быть использованы расположенными на территории Российской Федерации предприятиями и объединениями предприятий, в составе (структуре) которых независимо от форм собственности и подчинения находятся тепловые электростанции и котельные.

Choose Language: 
Format: Electronic (pdf/doc)
Page Count: 57

Approved: RAO UES of Russia, 3/15/1995

SKU: RUSS126282

Price: $735.63

The Product is Contained in the Following Classifiers:

Power industry » 17. Welding. Heat treatment. Metal control »

PromExpert » SECTION IV. INDUSTRIAL SAFETY » II Industrial safety requirements for operation of a hazardous production facility » 2 Special industrial safety requirements for operation of a hazardous production facility » 2.6 Industrial safety requirements for pressure equipment »

ISO classifier » 27 ENERGY AND HEATING TECHNOLOGY » 27.060 Burners. Boilers » 27.060.01 Burners and boilers in general »

The Document References:

GOST 1050-88: Carbon structural quality steel gauged bars with special surface finish. General specifications

GOST 12503-75: Steel Methods of ultrasonic control. General requirements

GOST 1412-85: Flakish graphite cast iron

GOST 14782-86: Nondestructive testing. Welded joints. Ultrasonic methods

GOST 1497-84: Metals. Methods of tension test

GOST 15467-79: Product quality control. Basic concepts. Terms and definitions

GOST 18442-80: Non-destructive testing. Capillary methods. General requirements

GOST 18661-73: Steel. Method for measurement of hardness by shock indentation

GOST 20415-82: Non-destructive testing. Acoustic methods. General principles

GOST 20911-89: Technical diagnostics. Terms and definitions

GOST 22761-77: Metals and alloys. Brinell hardness test by static action portable hardness meters

GOST 22762-77: Metals and alloys. Yield point hardness test by ball indentation

GOST 23172-78: Steam and hot-water stationary boilers. Terms and definitions

GOST 25866-83: Exploitation of technique. Terms and definitions

GOST 27.002-89: Industrial product dependability. General principles. Terms and definitions

GOST 27208-87: Cast iron casting. Methods of mechanical testing

GOST 28702-90: Non-destructive testing. Ultrasonic thickness gauges. General technical requirements

GOST 380-88: Common quality carbon steel. Grades

GOST 5520-79: Carbon, low-alloy and alloy sheet steel for boilers and pressure vessels. Specifications

GOST 5639-82: Steel and alloys. Methods for detection and determination of grain size

GOST 6996-66: Welded joints. Methods of mechanical properties determination

GOST 7512-82: Nondestructive testing. Welded joints. Radiography method

GOST 9454-78: Metals. Method for testing the impact strength at the low, room and high temperature

OST 108.031.08-85: Stationary boilers and steam and hot-water pipelines. Strength calculation norms. General provisions on substantiation of wall thickness.

OST 108.031.09-85: Stationary boilers and steam and hot-water pipelines. Strength calculation norms. Methods of determination of wall thickness.

OST 108.031.10-85: Stationary boilers and steam and hot-water pipelines. Strength calculation norms. Determination of strength ratios.

RD 10-49-94: Instructions for the Issue of Special Permits (Licenses) for Activities Connected With Safety Provision for Boiler Inspection Items and Lifting Structures

RD 34.15.027-93: Welding, Heat Treatment, and Testing of Boiler Tube Systems and Piping During Installation and Repair of Electric Supply Station Equipment (RTM-1s-93)

RD 34.17.410-97: Instructions for control of metal of boiler drums with pressure up to 4 MPa.

RTM 108.031.111-80: Stationary Gas Turbine Boilers. Strength Analysis

The Document is Referenced By:

RD 153-34.1-17.461-00: Methodological guidelines for penetrant testing of welded joints, weld pads and parent metal during manufacturing, installation, operation and repairing of power equipment.

RD 34.17.410-97: Instructions for control of metal of boiler drums with pressure up to 4 MPa.

RD 34.17.446-97: Procedural Guidelines for Technical Diagnostics of Surface Heating Tubes of Steam and Hot Water Boilers Using Metal Magnetic Memory

RD RosJeK 05-014-98: Guidelines for expert examination of pipelines of steam and hot water of category IV, supervised by the Gosgortekhnadzor of Russia

Customers Who Viewed This Item Also Viewed:

Foundation bolts. Structure and dimensions
Language: English
Price: $198.99
Steel structures
Language: English
Price: $297.00
Concrete with polysterene aggregates. Specifications
Language: English
Price: $308.76
Steel welded vessels and apparatus. General technical conditions
Language: English
Price: $108.90
Guidance on the selection of precautionary statements for the labelling in accordance with GOST 31340-2013
Language: English
Price: $301.95
Billet of rotor shafts and rings of turbine generators
Language: English
Price: $1,487.33
Vessels and apparatus. Norms and methods of strength calculation. Calculation of cylindrical and conical shells, convex and flat bottoms and covers
Language: English
Price: $287.10
Seismic building design code
Language: English
Price: $594.00
On the approval of federal norms and rules in the field of industrial safety "General explosion safety rules for explosive and fire hazardous chemical, petrochemical and oil refining industries"
Language: English
Price: $819.95
Unified system for design documentation. Exploitative documents
Language: English
Price: $150.48
Hexagon head bolts. Product grades A and B
Language: English
Price: $203.94
Hexagon head screws. Product grades A and B
Language: English
Price: $271.56
Shearers. General technical requirements. Test methods
Language: English
Price: $283.65
Risk management. Risk analysis of technological systems
Language: English
Price: $357.12
Steel. Methods of test and estimation of macrostructure
Language: English
Price: $145.53
Basic norms of interchangeability. Involute splined joints with 30° profile angle. Dimensions, tolerances and measurable sizes
Language: English
Price: $463.14
Non-destructive Testing. Welded Joints. Ultrasonic Methods
Language: English
Price: $140.58
Petroleum and petroleum products. Methods of sampling
Language: English
Price: $249.48
Labelling of chemicals. General requirements
Language: English
Price: $203.94
High-strength structural bolting assemblies for preloading. General requirements
Language: English
Price: $453.84


AzerbaijanLaws.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.

Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.

Placing Your Order

Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. 
Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfill. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.

Your Order Best Quality and Authenticity Guarantee

Your order is provided in electronic format (usually an Adobe Acrobat or MS Word). 
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.

All Codes and Regulations

All Categories

Send us a message Expand Collapse

Leave your message in the form below, and we will write back by e-mail!